Daily Papers

JEPA-family world models use a static predictor whose weights do not adapt when test-time dynamics diverge from training. We compare two mechanisms for incorporating accumulated experience into a JEPA predictor under distribution shift: operand-side injection, where a compressed experience representation is added as a residual to the predictor's hidden state (EI-JEPA), and operator-side modulation, where the same representation generates low-rank weight deltas via LoRA applied to the predictor's weights (EPM-JEPA). On a pre-registered comparison (Moving MNIST, gravity shift), EPM-JEPA (D_shift^{n=50} = 0.7848 +/- 0.0078, three seeds) differs from EI-JEPA (0.8238) by delta = 4.74% - Outcome C: a null result - by our stated criterion, a valid outcome. As a secondary, non-pre-registered observation, EPM-JEPA improves 1.90% over a no-memory baseline (0.8000), consistently across seeds, while EI-JEPA underperforms the baseline, indicating the benefit is specific to weight-level modulation. Our primary contribution is a mechanism analysis: the D_shift^{n=50} trajectory reflects three independent dynamical processes - buffer cycling, EMA target drift, and an intrinsic LoRA settling transient of +0.021 - rather than convergence to equilibrium. These findings motivate PEM-JEPA, a physics-grounded successor addressing this dynamical-peak limitation.

The received in-phase and quadrature (I/Q) baseband signals inherently encode physical-layer and channel characteristics of wireless links. Learning robust and transferable representations directly from such raw signals, however, remains challenging due to heterogeneous communication systems, diverse propagation environments, and limited labeled data. To address this, we present LWM-Spectro, a transformer-based foundation model pretrained on large-scale I/Q data represented as time-frequency spectrograms. The model leverages self-supervised masked modeling, contrastive learning, and a mixture-of-experts (MoE) architecture to learn general-purpose wireless representations. These representations transfer effectively to downstream tasks such as modulation classification and joint SNR/mobility recognition, even with minimal supervision. Across tasks, LWM-Spectro consistently outperforms state-of-the-art deep learning baselines in both few-shot and data-rich regimes, providing a unified foundation for wireless learning.

Received OFDM grids preserve both pilot and payload observations, yet wireless foundation models are rarely pre-trained on them. We introduce LWM-TF, a 9.58M-parameter factorized masked autoencoder pre-trained on complex 5G NR uplink grids taken after the FFT and before channel estimation. Each block attends first across OFDM symbols and then across resource blocks and receive antennas, and the mask follows the same two axes. Because the payload phase is unpredictable, the model reconstructs the normalized log-power of each masked token and predicts its scale separately; ablations show that the two terms are complementary and that this target outperforms complex-signal reconstruction. The encoder is pre-trained on 850,496 physical uplink shared channel (PUSCH) slots from a 10^6-slot dataset simulated with the NR transmit chain under various channel conditions. With the encoder frozen, linear probes classify modulation, predict CRC success, and detect UE mobility. On a separately generated test set, 16 labeled slots per class give 0.85 modulation accuracy, 0.82 CRC area under the ROC curve (AUROC), and 0.73 mobility AUROC, ahead of a supervised CNN on every paired draw. With 10,000 labels the probes reach 0.94, 0.96, and 0.92, well above engineered receiver statistics, and detect mobility where the CNN stays at chance. Without any impairment labels, distances in the frozen feature space flag unseen waveform impairments with 0.78 macro AUROC, against 0.68 for receiver statistics. A single pre-trained encoder thus provides receiver features that transfer across tasks, most strongly when labels are scarce.

In the image acquisition process, various forms of degradation, including noise, haze, and rain, are frequently introduced. These degradations typically arise from the inherent limitations of cameras or unfavorable ambient conditions. To recover clean images from degraded versions, numerous specialized restoration methods have been developed, each targeting a specific type of degradation. Recently, all-in-one algorithms have garnered significant attention by addressing different types of degradations within a single model without requiring prior information of the input degradation type. However, these methods purely operate in the spatial domain and do not delve into the distinct frequency variations inherent to different degradation types. To address this gap, we propose an adaptive all-in-one image restoration network based on frequency mining and modulation. Our approach is motivated by the observation that different degradation types impact the image content on different frequency subbands, thereby requiring different treatments for each restoration task. Specifically, we first mine low- and high-frequency information from the input features, guided by the adaptively decoupled spectra of the degraded image. The extracted features are then modulated by a bidirectional operator to facilitate interactions between different frequency components. Finally, the modulated features are merged into the original input for a progressively guided restoration. With this approach, the model achieves adaptive reconstruction by accentuating the informative frequency subbands according to different input degradations. Extensive experiments demonstrate that the proposed method achieves state-of-the-art performance on different image restoration tasks, including denoising, dehazing, deraining, motion deblurring, and low-light image enhancement. Our code is available at https://github.com/c-yn/AdaIR.

Orthogonal frequency-division multiplexing (OFDM) is widely adopted in frequency-selective channels for its ability to simplify equalization, yet it also causes large signal peaks, out-of-band (OOB) emissions, and spectral leakage. We study downlink precoding/combining for multi-user multiple-input multiple-output (MU-MIMO)--OFDM systems by minimizing the sum of the users' mean-squared errors (MSEs) under per-subcarrier transmit-power limits, per-antenna OOB spectral-mask constraints, and per-antenna peak-amplitude (clipping) constraints, which confine the emitted spectrum and limit waveform peaks to reduce power-amplifier saturation, nonlinear distortion, and spectral regrowth. The resulting nonconvex problem is handled by a minimum mean-squared error (MMSE) based block coordinate descent (BCD), with a closed-form combiner update and an alternating direction method of multipliers (ADMM) algorithm with closed-form updates for the precoder subproblem. Simulations show clear gains over well-known benchmark schemes.

Modulation classification (MC) is the first step performed at the receiver side unless the modulation type is explicitly indicated by the transmitter. Machine learning techniques have been widely used for MC recently. In this paper, we propose a novel MC technique dubbed as Joint Equalization and Modulation Classification based on Constellation Network (EMC2-Net). Unlike prior works that considered the constellation points as an image, the proposed EMC2-Net directly uses a set of 2D constellation points to perform MC. In order to obtain clear and concrete constellation despite multipath fading channels, the proposed EMC2-Net consists of equalizer and classifier having separate and explainable roles via novel three-phase training and noise-curriculum pretraining. Numerical results with linear modulation types under different channel models show that the proposed EMC2-Net achieves the performance of state-of-the-art MC techniques with significantly less complexity.

Integrated sensing and communication (ISAC) is a novel capability expected for sixth generation (6G) cellular networks. To that end, several challenges must be addressed to enable both mono- and bistatic sensing in existing deployments. A common impairment in both architectures is oscillator phase noise (PN), which not only degrades communication performance, but also severely impairs radar sensing. To enable a broader understanding of orthogonal-frequency division multiplexing (OFDM)-based sensing impaired by PN, this article presents an analysis of sensing peformance in OFDM-based ISAC for different waveform parameter choices and settings in both mono- and bistatic architectures. In this context, the distortion of the adopted digital constellation modulation is analyzed and the resulting PN-induced effects in range-Doppler radar images are investigated both without and with PN compensation. These effects include peak power loss of target reflections and higher sidelobe levels, especially in the Doppler shift direction. In the conducted analysis, these effects are measured by the peak power loss ratio, peak-to-sidelobe level ratio, and integrated sidelobe level ratio parameters, the two latter being evaluated in both range and Doppler shift directions. In addition, the signal-to-interference ratio is analyzed to allow not only quantifying the distortion of a target reflection, but also measuring the interference floor level in a radar image. The achieved results allow to quantify not only the PN-induced impairments to a single target, but also how the induced degradation may impair the sensing performance of OFDM-based ISAC systems in multi-target scenarios.

We consider low-latency image transmission over a noisy wireless channel when correlated side information is present only at the receiver side (the Wyner-Ziv scenario). In particular, we are interested in developing practical schemes using a data-driven joint source-channel coding (JSCC) approach, which has been previously shown to outperform conventional separation-based approaches in the practical finite blocklength regimes, and to provide graceful degradation with channel quality. We propose a novel neural network architecture that incorporates the decoder-only side information at multiple stages at the receiver side. Our results demonstrate that the proposed method succeeds in integrating the side information, yielding improved performance at all channel noise levels in terms of the various distortion criteria considered here, especially at low channel signal-to-noise ratios (SNRs) and small bandwidth ratios (BRs). We also provide the source code of the proposed method to enable further research and reproducibility of the results.

In this work, we present efficient modulation, a novel design for efficient vision networks. We revisit the modulation mechanism, which operates input through convolutional context modeling and feature projection layers, and fuses features via element-wise multiplication and an MLP block. We demonstrate that the modulation mechanism is particularly well suited for efficient networks and further tailor the modulation design by proposing the efficient modulation (EfficientMod) block, which is considered the essential building block for our networks. Benefiting from the prominent representational ability of modulation mechanism and the proposed efficient design, our network can accomplish better trade-offs between accuracy and efficiency and set new state-of-the-art performance in the zoo of efficient networks. When integrating EfficientMod with the vanilla self-attention block, we obtain the hybrid architecture which further improves the performance without loss of efficiency. We carry out comprehensive experiments to verify EfficientMod's performance. With fewer parameters, our EfficientMod-s performs 0.6 top-1 accuracy better than EfficientFormerV2-s2 and is 25% faster on GPU, and 2.9 better than MobileViTv2-1.0 at the same GPU latency. Additionally, our method presents a notable improvement in downstream tasks, outperforming EfficientFormerV2-s by 3.6 mIoU on the ADE20K benchmark. Code and checkpoints are available at https://github.com/ma-xu/EfficientMod.

We introduce a novel deep reinforcement learning (DRL) approach to jointly optimize transmit beamforming and reconfigurable intelligent surface (RIS) phase shifts in a multiuser multiple input single output (MU-MISO) system to maximize the sum downlink rate under the phase-dependent reflection amplitude model. Our approach addresses the challenge of imperfect channel state information (CSI) and hardware impairments by considering a practical RIS amplitude model. We compare the performance of our approach against a vanilla DRL agent in two scenarios: perfect CSI and phase-dependent RIS amplitudes, and mismatched CSI and ideal RIS reflections. The results demonstrate that the proposed framework significantly outperforms the vanilla DRL agent under mismatch and approaches the golden standard. Our contributions include modifications to the DRL approach to address the joint design of transmit beamforming and phase shifts and the phase-dependent amplitude model. To the best of our knowledge, our method is the first DRL-based approach for the phase-dependent reflection amplitude model in RIS-aided MU-MISO systems. Our findings in this study highlight the potential of our approach as a promising solution to overcome hardware impairments in RIS-aided wireless communication systems.

Recently, photonic transformer accelerators (PTAs) have successfully achieved significant speedup and energy efficiency improvements over electronic accelerators for expediting Transformer inference. However, state-of-the-art rely on expensive multi-wavelength light generation and large dot-product units due to active phase-shifter components, thus making their approach inefficient and impractical. To address this, we propose MDTransformer, a novel hardware-software co-design of PTA based on mode-division optical dataflow and operations. Specifically, MDTransformer performs complex matrix operations using spatial-mode interference, that leverages the inverse-designed multi-mode couplers, crossings, and Mach-Zehnder IQ modulators into a compact mode-division photonic tensor core (MPTC), capable of executing matrix multiplications in the optical domain. Its each guided mode (i.e., TE0-TE3) acts as an independent computational lane, enabling four-fold parallelism-per-waveguide without spectral filtering or free-spectral-range limitations. Moreover, its coherent detection and IQ modulation jointly encode amplitude and phase, realizing complex-valued arithmetic for full-range operations in transformers. MDTransformer offers analog multiplication with sub-4-bit effective precision and inter-modal crosstalk below -30 dB. Its inverse-designed approach also offers scalable and full compatibility with single-laser continuous-wave operation at 1550 nm. Experimental results show that MDTransformer achieves 40.4% area reduction, 63.6% power saving, 40.6% energy saving, and comparable latency over the state-of-the-art PTA across different workloads (i.e., DeiT-Tiny/Small/Base and BERT-Base/Large). These results show that MDTransformer offers a practical solution for high-performance and energy-efficient transformer-based systems.

High spatial frequency information, including fine details like textures, significantly contributes to the accuracy of semantic segmentation. However, according to the Nyquist-Shannon Sampling Theorem, high-frequency components are vulnerable to aliasing or distortion when propagating through downsampling layers such as strided-convolution. Here, we propose a novel Spatial Frequency Modulation (SFM) that modulates high-frequency features to a lower frequency before downsampling and then demodulates them back during upsampling. Specifically, we implement modulation through adaptive resampling (ARS) and design a lightweight add-on that can densely sample the high-frequency areas to scale up the signal, thereby lowering its frequency in accordance with the Frequency Scaling Property. We also propose Multi-Scale Adaptive Upsampling (MSAU) to demodulate the modulated feature and recover high-frequency information through non-uniform upsampling This module further improves segmentation by explicitly exploiting information interaction between densely and sparsely resampled areas at multiple scales. Both modules can seamlessly integrate with various architectures, extending from convolutional neural networks to transformers. Feature visualization and analysis confirm that our method effectively alleviates aliasing while successfully retaining details after demodulation. Finally, we validate the broad applicability and effectiveness of SFM by extending it to image classification, adversarial robustness, instance segmentation, and panoptic segmentation tasks. The code is available at https://github.com/Linwei-Chen/SFM.

Neural fields, mapping low-dimensional input coordinates to corresponding signals, have shown promising results in representing various signals. Numerous methodologies have been proposed, and techniques employing MLPs and grid representations have achieved substantial success. MLPs allow compact and high expressibility, yet often suffer from spectral bias and slow convergence speed. On the other hand, methods using grids are free from spectral bias and achieve fast training speed, however, at the expense of high spatial complexity. In this work, we propose a novel way for exploiting both MLPs and grid representations in neural fields. Unlike the prevalent methods that combine them sequentially (extract features from the grids first and feed them to the MLP), we inject spectral bias-free grid representations into the intermediate features in the MLP. More specifically, we suggest a Coordinate-Aware Modulation (CAM), which modulates the intermediate features using scale and shift parameters extracted from the grid representations. This can maintain the strengths of MLPs while mitigating any remaining potential biases, facilitating the rapid learning of high-frequency components. In addition, we empirically found that the feature normalizations, which have not been successful in neural filed literature, proved to be effective when applied in conjunction with the proposed CAM. Experimental results demonstrate that CAM enhances the performance of neural representation and improves learning stability across a range of signals. Especially in the novel view synthesis task, we achieved state-of-the-art performance with the least number of parameters and fast training speed for dynamic scenes and the best performance under 1MB memory for static scenes. CAM also outperforms the best-performing video compression methods using neural fields by a large margin.

Learned image compression (LIC) is bottlenecked by the need to store independent models for each rate-distortion operating point. Existing variable bit-rate (VBR) methods aim to reduce this overhead via dense parameter modulation, but forcing a shared backbone to approximate divergent mappings causes severe feature entanglement. Specifically, low-rate smoothing gradients inherently conflict with the preservation of high-frequency textural details, leading to sub-optimal performance. To resolve this, we propose MixCompress, a unified VBR framework based on sparse structural specialization. While sparsely gated Mixture-of-Experts (MoE) routing successfully mitigates gradient conflict, it operates on a fixed computational budget. To address the increased representational demands of higher bit-rates we introduce a Mixture-of-Depths (MoD) extension to dynamically scale model capacity. Combined with Conditional Auxiliary Transforms (CAT) for dynamic sub-band energy modulation, our hierarchical framework effectively dynamically scales capacity. Extensive evaluations demonstrate that MixCompress not only matches individually optimized single-rate baselines but can even surpass them, establishing a new Pareto frontier for computationally efficient image coding.

How to explore useful features from images as prompts to guide the deep image restoration models is an effective way to solve image restoration. In contrast to mining spatial relations within images as prompt, which leads to characteristics of different frequencies being neglected and further remaining subtle or undetectable artifacts in the restored image, we develop a Frequency Prompting image restoration method, dubbed FPro, which can effectively provide prompt components from a frequency perspective to guild the restoration model address these differences. Specifically, we first decompose input features into separate frequency parts via dynamically learned filters, where we introduce a gating mechanism for suppressing the less informative elements within the kernels. To propagate useful frequency information as prompt, we then propose a dual prompt block, consisting of a low-frequency prompt modulator (LPM) and a high-frequency prompt modulator (HPM), to handle signals from different bands respectively. Each modulator contains a generation process to incorporate prompting components into the extracted frequency maps, and a modulation part that modifies the prompt feature with the guidance of the decoder features. Experimental results on commonly used benchmarks have demonstrated the favorable performance of our pipeline against SOTA methods on 5 image restoration tasks, including deraining, deraindrop, demoiréing, deblurring, and dehazing. The source code and pre-trained models will be available at https://github.com/joshyZhou/FPro.

Inter-user interference remains a critical bottleneck in wireless communication systems, particularly in the emerging paradigm of semantic communication (SemCom). Compared to traditional systems, inter-user interference in SemCom severely degrades key semantic information, often causing worse performance than Gaussian noise under the same power level. To address this challenge, inspired by the recently proposed concept of Orthogonal Model Division Multiple Access (OMDMA) that leverages semantic orthogonality rooted in the personalized joint source and channel (JSCC) models to distinguish users, we propose a novel, scalable framework that eliminates the need for user-specific JSCC models as did in original OMDMA. Our key innovation lies in shuffle-based orthogonalization, where randomly permuting the positions of JSCC feature vectors transforms inter-user interference into Gaussian-like noise. By assigning each user a unique shuffling pattern, the interference is treated as channel noise, enabling effective mitigation using diffusion models (DMs). This approach not only simplifies system design by requiring a single universal JSCC model but also enhances privacy, as shuffling patterns act as implicit private keys. Additionally, we extend the framework to scenarios involving semantically correlated data. By grouping users based on semantic similarity, a cooperative beamforming strategy is introduced to exploit redundancy in correlated data, further improving system performance. Extensive simulations demonstrate that the proposed method outperforms state-of-the-art multi-user SemCom frameworks, achieving superior semantic fidelity, robustness to interference, and scalability-all without requiring additional training overhead.

InfRared Small Target Detection (IRSTD) is a prominent and challenging task in computer vision. In recent years, text-guided methods have significantly improved detection performance. However, they still suffer from two key limitations. First, a single text description simultaneously modeling both background and target leads to semantic entanglement, which contradicts the objective of background suppression and target enhancement. Second, reliance on image-specific textual prompts (requiring additional external models such as CLIP during inference) results in deployment constraints. To address these issues, we propose a novel Dual-knowledge Guided Network (DGNet) based on multiple generalizable texts. Specifically, we design a Prior-knowledge Wavelet Modulation (PWM) module, which leverages dual textual priors that separately characterize large-scale backgrounds and sparse targets to effectively disentangle and modulate entangled semantics in the frequency domain. Furthermore, we introduce a Consensus-knowledge Directional Alignment (CDA) loss, which models the initial state and the ideal target across samples as `complex background' and `bright target', respectively, thereby constructing a clear and unified directional optimization trajectory for the model. Extensive experiments on three public datasets demonstrate the superior performance of DGNet and the effectiveness of each component. The source code is available at https://github.com/iLearn-Lab/MM26-DGNet.

Orthogonal time frequency space (OTFS) modulation was shown to provide significant error performance advantages over orthogonal frequency division multiplexing (OFDM) in delay--Doppler channels. In order to detect OTFS modulated data, the channel impulse response needs to be known at the receiver. In this paper, we propose embedded pilot-aided channel estimation schemes for OTFS. In each OTFS frame, we arrange pilot, guard, and data symbols in the delay--Doppler plane to suitably avoid interference between pilot and data symbols at the receiver. We develop such symbol arrangements for OTFS over multipath channels with integer and fractional Doppler shifts, respectively. At the receiver, channel estimation is performed based on a threshold method and the estimated channel information is used for data detection via a message passing (MP) algorithm. Thanks to our specific embedded symbol arrangements, both channel estimation and data detection are performed within the same OTFS frame with a minimum overhead. We compare by simulations the error performance of OTFS using the proposed channel estimation and OTFS with ideally known channel information and observe only a marginal performance loss. We also demonstrate that the proposed channel estimation in OTFS significantly outperforms OFDM with known channel information. Finally, we present extensions of the proposed schemes to MIMO and multi-user uplink/downlink.

Integrated sensing and communication (ISAC) is a key technology for next generation wireless networks, requiring highly sensitive, compact receiver front ends with multiband coverage. Rydberg atomic receivers (RARs) provide a promising architecture that satisfies these requirements owing to their high sensitivity and continuous frequency tuning capability. Unlike in classical ISAC systems utilizing orthogonal resource allocation, executing concurrent multi band tasks within a single atomic ensemble relies on shared energy state transitions. Owing to this shared structure, the communication and sensing tradeoff in RAR-based ISAC introduces an atomic-response tradeoff beyond the classical subspace and deterministic-random tradeoffs. This paper studies a multi-branch RAR (MB-RAR) architecture for joint communication and radar sensing. By solving the five level Lindblad master equation at the local oscillator (LO) biased operating point and linearizing the communication and sensing radio frequency (RF) signals as small perturbations, we obtain the double-sideband dynamic signal response of the MB-RAR. The model reveals two intrinsic constraints. First, increasing the coupling laser strength broadens the response bandwidth but can weaken the atomic response. Second, strengthening one branch's LO can suppress the other branch's conversion gain through the shared Rydberg state, even when the latter's LO bias remains fixed, which is termed the inter band gain inhibition (IBGI). Based on these mechanisms, we formulate the achievable Cramér--Rao bound (CRB)-rate region and develop a rate-constrained joint search over coupling strength and LO power allocation. Numerical results validate the proposed response model and show that joint optimization provides a more complete characterization of the achievable CRB-rate region.

Interactive image restoration aims to restore images by adjusting several controlling coefficients, which determine the restoration strength. Existing methods are restricted in learning the controllable functions under the supervision of known degradation types and levels. They usually suffer from a severe performance drop when the real degradation is different from their assumptions. Such a limitation is due to the complexity of real-world degradations, which can not provide explicit supervision to the interactive modulation during training. However, how to realize the interactive modulation in real-world super-resolution has not yet been studied. In this work, we present a Metric Learning based Interactive Modulation for Real-World Super-Resolution (MM-RealSR). Specifically, we propose an unsupervised degradation estimation strategy to estimate the degradation level in real-world scenarios. Instead of using known degradation levels as explicit supervision to the interactive mechanism, we propose a metric learning strategy to map the unquantifiable degradation levels in real-world scenarios to a metric space, which is trained in an unsupervised manner. Moreover, we introduce an anchor point strategy in the metric learning process to normalize the distribution of metric space. Extensive experiments demonstrate that the proposed MM-RealSR achieves excellent modulation and restoration performance in real-world super-resolution. Codes are available at https://github.com/TencentARC/MM-RealSR.

A lack of standardized datasets has long hindered progress in automatic intrapulse modulation classification (AIMC), a critical task in radar signal analysis for electronic support systems, particularly under noisy or degraded conditions. AIMC seeks to identify the modulation type embedded within a single radar pulse from its complex in-phase and quadrature (I/Q) representation, enabling automated interpretation of intrapulse structure. This paper introduces AIMC-Spec, a comprehensive synthetic dataset for spectrogram-based image classification, encompassing 30 modulation types across 5 signal-to-noise ratio (SNR) levels. To benchmark AIMC-Spec, five representative deep learning algorithms ranging from lightweight CNNs and denoising architectures to transformer-based networks were re-implemented and evaluated under a unified input format. The results reveal significant performance variation, with frequency-modulated (FM) signals classified more reliably than phase-modulated (PM) types, particularly at low SNRs. A focused FM-only test further highlights how modulation type and network architecture influence classifier robustness. AIMC-Spec establishes a reproducible baseline and provides a foundation for future research and standardization in the AIMC domain.

Pinching-antenna systems attach dielectric pinches to a waveguide, creating line-of-sight radiation points within a few meters of any user. The pinches on one waveguide, however, radiate the same signal, unlike a conventional array, where each element transmits a dedicated signal. Separating the signals of multiple users therefore becomes challenging and requires a new perspective on multiple access. Most existing studies rest on an idealized model, and no survey examines the access schemes under realistic impairments. This article surveys multiple access in pinching-antenna systems and organizes fifty-six works into a unified taxonomy by spatial degrees of freedom. The users of one waveguide can be separated only in time, frequency, power, or guided mode, while multiple waveguides add the space domain. The article then identifies the impairments critical to this separation, which perturb the effective channel, leak interference across orthogonal resources, or couple the pinches on the uplink, and summarizes them in an impairment-versus-method map. A unified evaluation of time-, frequency-, power-, and space-domain access under identical channel and impairment models reveals that the degradation is method specific. The analytical and numerical results give insight into multiple access in these systems and provide a basis for its impairment-aware design, a necessary step toward their adoption in practical networks.

In cognitive radio systems, the ability to accurately detect primary user's signal is essential to secondary user in order to utilize idle licensed spectrum. Conventional energy detector is a good choice for blind signal detection, while it suffers from the well-known SNR-wall due to noise uncertainty. In this letter, we firstly propose a deep learning based signal detector which exploits the underlying structural information of the modulated signals, and is shown to achieve the state of the art detection performance, requiring no prior knowledge about channel state information or background noise. In addition, the impacts of modulation scheme and sample length on performance are investigated. Finally, a deep learning based cooperative detection system is proposed, which is shown to provide substantial performance gain over conventional cooperative sensing methods.

Current RF machine-learning pipelines rely on task-specific deep networks for modulation classification and related tasks, but these models require custom architectures and labeled datasets for each problem, generalize poorly across channel conditions and SNRs, and offer little interpretability. In contrast, modern multimodal large language models (MLLMs) can integrate heterogeneous visual and textual data and exhibit strong cross-domain generalization and explanation capabilities. Our goal in this work is to explore whether vision-language models (VLMs) can be adapted to directly perceive RF signals and reason about modulation patterns without redesigning their architectures or injecting RF-specific inductive biases. To achieve this, we convert complex IQ streams into time-series, spectrogram, and joint RF visualizations, build a 57-class RF visual question answering benchmark, and show that lightweight parameter-efficient fine-tuning can enhance the accuracy of a general-purpose VLM from around 10% to nearly 90%, while ensuring robustness to noise and out-of-vocabulary modulations and the ability to produce human-readable rationales. The obtained results show that combining RF-to-image conversion with promptable VLMs provides a scalable and practical foundation for RF-aware AI systems in future 6G networks.

This paper proposes a convolutional neural network (CNN)-based detector for faster-than-Nyquist (FTN) signaling that employs structured fixed kernel layers with domain-informed masking to mitigate intersymbol interference (ISI). Unlike standard CNNs with sliding kernels, the proposed method utilizes fixed-position kernels to directly capture ISI effects at varying distances from the central symbol. A hierarchical filter allocation strategy is also introduced, assigning more filters to earlier layers for strong ISI patterns and fewer to later layers for weaker ones. This design improves detection accuracy while reducing redundant operations. Simulation results show that the detector achieves near-optimal bit error rate (BER) performance for tau geq 0.7, closely matching the BCJR algorithm, and offers computational gains of up to 46% and 84% over M-BCJR for BPSK and QPSK, respectively. Comparative analysis with other methods further highlights the efficiency and effectiveness of the proposed approach. To the best of our knowledge, this is the first application of a fixed-kernel CNN architecture tailored for FTN detection in the literature.

The Mixture-of-Experts (MoE) approach has demonstrated outstanding scalability in multi-task learning including low-level upstream tasks such as concurrent removal of multiple adverse weather effects. However, the conventional MoE architecture with parallel Feed Forward Network (FFN) experts leads to significant parameter and computational overheads that hinder its efficient deployment. In addition, the naive MoE linear router is suboptimal in assigning task-specific features to multiple experts which limits its further scalability. In this work, we propose an efficient MoE architecture with weight sharing across the experts. Inspired by the idea of linear feature modulation (FM), our architecture implicitly instantiates multiple experts via learnable activation modulations on a single shared expert block. The proposed Feature Modulated Expert (FME) serves as a building block for the novel Mixture-of-Feature-Modulation-Experts (MoFME) architecture, which can scale up the number of experts with low overhead. We further propose an Uncertainty-aware Router (UaR) to assign task-specific features to different FM modules with well-calibrated weights. This enables MoFME to effectively learn diverse expert functions for multiple tasks. The conducted experiments on the multi-deweather task show that our MoFME outperforms the baselines in the image restoration quality by 0.1-0.2 dB and achieves SOTA-compatible performance while saving more than 72% of parameters and 39% inference time over the conventional MoE counterpart. Experiments on the downstream segmentation and classification tasks further demonstrate the generalizability of MoFME to real open-world applications.

Sequence models must decide what to write into memory and what to retain. In quantum and quantum-inspired sequence learning, nonlinear recurrent updates often require repeated circuit evaluations and sequential backpropagation through time, making long contexts costly. Gated fast-weight programmers (FWPs) based on quantum-inspired Kolmogorov-Arnold networks (QKANs) alleviate this bottleneck by storing context in time-varying fast parameters. However, their scalar gate applies one retention-write balance to every fast-state coordinate, forcing all parameters to share a memory timescale. We introduce Self-Modulating QKAN-based FWPs, which replace this broadcast gate with low-rank-generated element-wise modulation of the new-proposal branch, a bounded old-state branch, or both. We further propose Complementary Matrix Gating (CMG), which uses one sigmoid matrix gate to retain the old state and its complement to write the new proposal. CMG provides coordinate-wise memory control while preserving the bounded convex update and affine prefix-scan structure of scalar gating, at the modulation-head cost of a single-branch rule. We compare four self-modulating rules with scalar gating across four FWP architectures combining classical and QKAN-based slow and fast programmers. Across seven single-step forecasting benchmarks and five sequence lengths, CMG gives the most consistent improvements for architectures whose fast programmer incorporates a QKAN-based module. In direct multi-step forecasting of Jaynes-Cummings and transmon-resonator dynamics simulated with CUDA-Q Dynamics, CMG models maintain mean-squared errors on the order of 0.001 or lower across forecasting horizons of 4, 8, and 16 steps, while improving on their scalar-gated counterparts by at least 91.2%. These results establish coordinate-wise complementary modulation as a stable and effective update for QKAN-based FWPs.

Innovation in the physical layer of communication systems has traditionally been achieved by breaking down the transceivers into sets of processing blocks, each optimized independently based on mathematical models. Conversely, deep learning (DL)-based systems are able to handle increasingly complex tasks for which no tractable models are available. This thesis aims at comparing different approaches to unlock the full potential of DL in the physical layer. First, we describe a neural network (NN)-based block strategy, where an NN is optimized to replace a block in a communication system. We apply this strategy to introduce a multi-user multiple-input multiple-output (MU-MIMO) detector that builds on top of an existing DL-based architecture. Second, we detail an end-to-end strategy, in which the transmitter and receiver are modeled as an autoencoder. This approach is illustrated with the design of waveforms that achieve high throughputs while satisfying peak-to-average power ratio (PAPR) and adjacent channel leakage ratio (ACLR) constraints. Lastly, we propose a hybrid strategy, where multiple DL components are inserted into a traditional architecture but are trained to optimize the end-to-end performance. To demonstrate its benefits, we propose a DL-enhanced MU-MIMO receiver that both enable lower bit error rates (BERs) compared to a conventional receiver and remains scalable to any number of users. Each approach has its own strengths and shortcomings. While the first one is the easiest to implement, its individual block optimization does not ensure the overall system optimality. On the other hand, systems designed with the second approach are computationally complex but allow for new opportunities such as pilotless transmissions. Finally, the combined flexibility and end-to-end performance gains of the third approach motivate its use for short-term practical implementations.

Holographic Metasurface Transceivers (HMTs) are emerging as cost-effective substitutes to large antenna arrays for beamforming in Millimeter and TeraHertz wave communication. However, to achieve desired channel gains through beamforming in HMT, phase-shifts of a large number of elements need to be appropriately set, which is challenging. Also, these optimal phase-shifts depend on the location of the receivers, which could be unknown. In this work, we develop a learning algorithm using a {\it fixed-budget multi-armed bandit framework} to beamform and maximize received signal strength at the receiver for far-field regions. Our algorithm, named \Algo exploits the parametric form of channel gains of the beams, which can be expressed in terms of two {\it phase-shifting parameters}. Even after parameterization, the problem is still challenging as phase-shifting parameters take continuous values. To overcome this, {\it\HB} works with the discrete values of phase-shifting parameters and exploits their unimodal relations with channel gains to learn the optimal values faster. We upper bound the probability of {\it\HB} incorrectly identifying the (discrete) optimal phase-shift parameters in terms of the number of pilots used in learning. We show that this probability decays exponentially with the number of pilot signals. We demonstrate that {\it\HB} outperforms state-of-the-art algorithms through extensive simulations.

Multimodal learning helps to comprehensively understand the world, by integrating different senses. Accordingly, multiple input modalities are expected to boost model performance, but we actually find that they are not fully exploited even when the multimodal model outperforms its uni-modal counterpart. Specifically, in this paper we point out that existing multimodal discriminative models, in which uniform objective is designed for all modalities, could remain under-optimized uni-modal representations, caused by another dominated modality in some scenarios, e.g., sound in blowing wind event, vision in drawing picture event, etc. To alleviate this optimization imbalance, we propose on-the-fly gradient modulation to adaptively control the optimization of each modality, via monitoring the discrepancy of their contribution towards the learning objective. Further, an extra Gaussian noise that changes dynamically is introduced to avoid possible generalization drop caused by gradient modulation. As a result, we achieve considerable improvement over common fusion methods on different multimodal tasks, and this simple strategy can also boost existing multimodal methods, which illustrates its efficacy and versatility. The source code is available at https://github.com/GeWu-Lab/OGM-GE_CVPR2022.

We present GRaF, Generalizable Radio-Frequency (RF) Radiance Fields, a framework that models RF signal propagation to synthesize spatial spectra at arbitrary transmitter or receiver locations, where each spectrum measures signal power across all surrounding directions at the receiver. Unlike state-of-the-art methods that adapt vanilla Neural Radiance Fields (NeRF) to the RF domain with scene-specific training, GRaF generalizes across scenes to synthesize spectra. To enable this, we prove an interpolation theory in the RF domain: the spatial spectrum from a transmitter can be approximated using spectra from geographically proximate transmitters. Building on this theory, GRaF comprises two components: (i) a geometry-aware Transformer encoder that captures spatial correlations from neighboring transmitters to learn a scene-independent latent RF radiance field, and (ii) a neural ray tracing algorithm that estimates spectrum reception at the receiver. Experimental results demonstrate that GRaF outperforms existing methods on single-scene benchmarks and achieves state-of-the-art performance on unseen scene layouts.

While Dynamic Convolution (DY-Conv) has shown promising performance by enabling adaptive weight selection through multiple parallel weights combined with an attention mechanism, the frequency response of these weights tends to exhibit high similarity, resulting in high parameter costs but limited adaptability. In this work, we introduce Frequency Dynamic Convolution (FDConv), a novel approach that mitigates these limitations by learning a fixed parameter budget in the Fourier domain. FDConv divides this budget into frequency-based groups with disjoint Fourier indices, enabling the construction of frequency-diverse weights without increasing the parameter cost. To further enhance adaptability, we propose Kernel Spatial Modulation (KSM) and Frequency Band Modulation (FBM). KSM dynamically adjusts the frequency response of each filter at the spatial level, while FBM decomposes weights into distinct frequency bands in the frequency domain and modulates them dynamically based on local content. Extensive experiments on object detection, segmentation, and classification validate the effectiveness of FDConv. We demonstrate that when applied to ResNet-50, FDConv achieves superior performance with a modest increase of +3.6M parameters, outperforming previous methods that require substantial increases in parameter budgets (e.g., CondConv +90M, KW +76.5M). Moreover, FDConv seamlessly integrates into a variety of architectures, including ConvNeXt, Swin-Transformer, offering a flexible and efficient solution for modern vision tasks. The code is made publicly available at https://github.com/Linwei-Chen/FDConv.

We demonstrate a compact, cost-effective snapshot spectral imaging system named Aperture Diffraction Imaging Spectrometer (ADIS), which consists only of an imaging lens with an ultra-thin orthogonal aperture mask and a mosaic filter sensor, requiring no additional physical footprint compared to common RGB cameras. Then we introduce a new optical design that each point in the object space is multiplexed to discrete encoding locations on the mosaic filter sensor by diffraction-based spatial-spectral projection engineering generated from the orthogonal mask. The orthogonal projection is uniformly accepted to obtain a weakly calibration-dependent data form to enhance modulation robustness. Meanwhile, the Cascade Shift-Shuffle Spectral Transformer (CSST) with strong perception of the diffraction degeneration is designed to solve a sparsity-constrained inverse problem, realizing the volume reconstruction from 2D measurements with Large amount of aliasing. Our system is evaluated by elaborating the imaging optical theory and reconstruction algorithm with demonstrating the experimental imaging under a single exposure. Ultimately, we achieve the sub-super-pixel spatial resolution and high spectral resolution imaging. The code will be available at: https://github.com/Krito-ex/CSST.

Deep learning models for channel estimation in Orthogonal Frequency Division Multiplexing (OFDM) systems often suffer from performance degradation under fast-fading channels and low-SNR scenarios. To address these limitations, we introduce the Adaptive Fortified Transformer (AdaFortiTran), a novel model specifically designed to enhance channel estimation in challenging environments. Our approach employs convolutional layers that exploit locality bias to capture strong correlations between neighboring channel elements, combined with a transformer encoder that applies the global Attention mechanism to channel patches. This approach effectively models both long-range dependencies and spectro-temporal interactions within single OFDM frames. We further augment the model's adaptability by integrating nonlinear representations of available channel statistics SNR, delay spread, and Doppler shift as priors. A residual connection is employed to merge global features from the transformer with local features from early convolutional processing, followed by final convolutional layers to refine the hierarchical channel representation. Despite its compact architecture, AdaFortiTran achieves up to 6 dB reduction in mean squared error (MSE) compared to state-of-the-art models. Tested across a wide range of Doppler shifts (200-1000 Hz), SNRs (0 to 25 dB), and delay spreads (50-300 ns), it demonstrates superior robustness in high-mobility environments.

The sum-rate performance of simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted full-duplex (FD) communication systems is investigated. The reflection and transmission coefficients of STAR-RIS elements are optimized for the energy splitting and mode switching protocols to maximize the weighted sum rate of the system. The underlying optimization problems are non-convex, and hence, the successive convex approximation technique has been employed to develop efficient algorithms to obtain sub-optimal solutions. Thereby, the maximum average weighted sum rate and corresponding coefficients at the STAR-RIS subject to predefined threshold rates and unit-modulus constraints are quantified. The performance of the proposed system design is compared with the conventional reflecting/transmitting-only RISs and half-duplex counterparts via simulations where it is observed that STAR-RIS can boost the performance of FD systems.

Single image reflection removal (SIRR) is challenging in real scenes, where reflection strength varies spatially and reflection patterns are tightly entangled with transmission structures. This paper presents a diffusion model with prior modulation framework (FUMO) that introduces explicit guidance signals to improve spatial controllability and structural faithfulness. Two priors are extracted directly from the mixed image, an intensity prior that estimates spatial reflection severity and a high-frequency prior that captures detail-sensitive responses via multi-scale residual aggregation. We propose a coarse-to-fine training paradigm. In the first stage, these cues are combined to gate the conditional residual injections, focusing the conditioning on regions that are both reflection-dominant and structure-sensitive. In the second stage, a fine-grained refinement network corrects local misalignment and sharpens fine details in the image space. Experiments conducted on both standard benchmarks and challenging images in the wild demonstrate competitive quantitative results and consistently improved perceptual quality. The code is released at https://github.com/Lucious-Desmon/FUMO.

While the field of multi-modal learning keeps growing fast, the deficiency of the standard joint training paradigm has become clear through recent studies. They attribute the sub-optimal performance of the jointly trained model to the modality competition phenomenon. Existing works attempt to improve the jointly trained model by modulating the training process. Despite their effectiveness, those methods can only apply to late fusion models. More importantly, the mechanism of the modality competition remains unexplored. In this paper, we first propose an adaptive gradient modulation method that can boost the performance of multi-modal models with various fusion strategies. Extensive experiments show that our method surpasses all existing modulation methods. Furthermore, to have a quantitative understanding of the modality competition and the mechanism behind the effectiveness of our modulation method, we introduce a novel metric to measure the competition strength. This metric is built on the mono-modal concept, a function that is designed to represent the competition-less state of a modality. Through systematic investigation, our results confirm the intuition that the modulation encourages the model to rely on the more informative modality. In addition, we find that the jointly trained model typically has a preferred modality on which the competition is weaker than other modalities. However, this preferred modality need not dominate others. Our code will be available at https://github.com/lihong2303/AGM_ICCV2023.

Modern optical mouse sensors, with their advanced precision and high responsiveness, possess an often overlooked vulnerability: they can be exploited for side-channel attacks. This paper introduces Mic-E-Mouse, the first-ever side-channel attack that targets high-performance optical mouse sensors to covertly eavesdrop on users. We demonstrate that audio signals can induce subtle surface vibrations detectable by a mouse's optical sensor. Remarkably, user-space software on popular operating systems can collect and broadcast this sensitive side channel, granting attackers access to raw mouse data without requiring direct system-level permissions. Initially, the vibration signals extracted from mouse data are of poor quality due to non-uniform sampling, a non-linear frequency response, and significant quantization. To overcome these limitations, Mic-E-Mouse employs a sophisticated end-to-end data filtering pipeline that combines Wiener filtering, resampling corrections, and an innovative encoder-only spectrogram neural filtering technique. We evaluate the attack's efficacy across diverse conditions, including speaking volume, mouse polling rate and DPI, surface materials, speaker languages, and environmental noise. In controlled environments, Mic-E-Mouse improves the signal-to-noise ratio (SNR) by up to +19 dB for speech reconstruction. Furthermore, our results demonstrate a speech recognition accuracy of roughly 42% to 61% on the AudioMNIST and VCTK datasets. All our code and datasets are publicly accessible on https://sites.google.com/view/mic-e-mouse.

Orbital angular momentum (OAM) multiplexing provides an infinite-dimensional discrete Hilbert space ideally suited for high-capacity free-space quantum key distribution (QKD). Nevertheless, pure scalar spatial modes carrying topological charge (|ell| ge 1) undergo severe decoherence when transmitted through terrestrial atmospheric turbulence. Turbulent refractive-index eddies split high-order vortex singularities, induce catastrophic intermodal crosstalk across adjacent topological channels, and rapidly drive the quantum bit error rate (QBER) well above the unconditional 11% security threshold associated with individual cloning attacks. Here, we demonstrate that hybrid polarization-OAM entangled states, known as vector vortex beams (VVBs), provide intrinsic, hardware-free immunity against turbulent perturbations. Because the optical anisotropy of terrestrial air is exceedingly small (Δn < 10^{-9}), refractive-index fluctuations couple symmetrically to orthogonal circular polarization modes as an identical common-mode scalar phase screen that cancels in the relative polarization-phase degree of freedom. By numerically propagating modal fields through modified power-spectral phase screens over turbulence strengths ranging from D/r_0 = 0 to 3.0, we show that the VVB encoding protocol suppresses the asymptotic QBER from 42.0% to 4.8%, yielding an error-suppression factor of approximately 11.6 without requiring active adaptive optics or deformable mirrors.

Neural operators learn to map initial conditions to the terminal solution of partial differential equations (PDEs), providing a surrogate for the full operator mapping. This enables rapid prediction across different input configurations. While recent neural operator architectures have demonstrated strong performance on diverse PDE tasks, their behavior under structured distribution shifts remains insufficiently understood. To investigate this, we study operator learning in a wave propagation setting governed by a one-dimensional variable-coefficient wave equation, using two representative architectures, the Fourier Neural Operator (FNO) and the Deep Operator Network (DeepONet). To examine their generalization under distribution shifts, we consider structured out-of-distribution (OOD) settings that independently vary input frequency and coefficient smoothness. The results show that under smoothness shifts, both models maintain stable performance, with FNO achieving lower error. In contrast, under frequency shifts, FNO exhibits a sharp increase in error under unseen high-frequency inputs, whereas DeepONet shows milder degradation despite higher overall error. Our analysis reveals that these differences arise from how each architecture represents and responds to variations in frequency structure. Together, these findings highlight a fundamental gap between strong in-distribution performance and generalization under distribution shifts in operator learning, underscoring the role of architectural representation bias in developing more reliable neural operators for physics-based PDE simulations beyond the training distribution.

Rotary positional embeddings (RoPE) are widely used in large language models to encode token positions through multiplicative rotations, yet their behavior at long context lengths remains poorly characterized. In this work, we reinterpret RoPE as phase modulation applied to a bank of complex oscillators, enabling analysis through classical signal processing theory. Under this formulation, we derive principled lower bounds on the RoPE base parameter that are necessary to preserve positional coherence over a target context length. These include a fundamental aliasing bound, analogous to a Nyquist limit, and a DC-component stability bound that constrains phase drift in low-frequency positional modes. We further extend this analysis to deep transformers, showing that repeated rotary modulation across layers compounds angular misalignment, tightening the base requirement as depth increases. Complementing these results, we derive a precision-dependent upper bound on the RoPE base arising from finite floating-point resolution. Beyond this limit, incremental phase updates become numerically indistinguishable, leading to positional erasure even in the absence of aliasing. Together, the lower and upper bounds define a precision- and depth-dependent feasibility region a Goldilocks zone for long-context transformers. We validate the framework through a comprehensive case study of state-of-the-art models, including LLaMA, Mistral, and DeepSeek variants, showing that observed successes, failures, and community retrofits align closely with the predicted bounds. Notably, models that violate the stability bound exhibit attention collapse and long-range degradation, while attempts to scale beyond one million tokens encounter a hard precision wall independent of architecture or training.

Shallow water environments create a challenging channel for communications. In this paper, we focus on the challenges posed by the frequency-selective signal distortion called the Doppler effect. We explore the design and performance of machine learning (ML) based demodulation methods --- (1) Deep Belief Network-feed forward Neural Network (DBN-NN) and (2) Deep Belief Network-Convolutional Neural Network (DBN-CNN) in the physical layer of Shallow Water Acoustic Communication (SWAC). The proposed method comprises of a ML based feature extraction method and classification technique. First, the feature extraction converts the received signals to feature images. Next, the classification model correlates the images to a corresponding binary representative. An analysis of the ML based proposed demodulation shows that despite the presence of instantaneous frequencies, the performance of the algorithm shows an invariance with a small 2dB error margin in terms of bit error rate (BER).

We develop a theory of pseudo-differential operators associated with the gyrator transform on modulation spaces. The gyrator transform is a two-dimensional linear canonical transform which can be viewed as a rotation in the time-frequency plane and is closely related to the fractional Fourier transform. Motivated by the global structure of the gyrator kernel, we work with Shubin global symbol classes on R^4. We first recall basic properties of modulation spaces and establish continuity and invertibility of the gyrator transform on these spaces, using its representation as a metaplectic operator. Then we introduce pseudo-differential operators defined via the gyrator transform and a Shubin symbol, and we prove boundedness results on modulation spaces and on gyrator-based modulation-Sobolev spaces. Our work extends and generalises earlier results of Mahato, Arya and Prasad on Schwartz and Sobolev spaces MahatoGyrator to the more flexible framework of modulation spaces.

We address the challenge of sound propagation simulations in 3D virtual rooms with moving sources, which have applications in virtual/augmented reality, game audio, and spatial computing. Solutions to the wave equation can describe wave phenomena such as diffraction and interference. However, simulating them using conventional numerical discretization methods with hundreds of source and receiver positions is intractable, making stimulating a sound field with moving sources impractical. To overcome this limitation, we propose using deep operator networks to approximate linear wave-equation operators. This enables the rapid prediction of sound propagation in realistic 3D acoustic scenes with moving sources, achieving millisecond-scale computations. By learning a compact surrogate model, we avoid the offline calculation and storage of impulse responses for all relevant source/listener pairs. Our experiments, including various complex scene geometries, show good agreement with reference solutions, with root mean squared errors ranging from 0.02 Pa to 0.10 Pa. Notably, our method signifies a paradigm shift as no prior machine learning approach has achieved precise predictions of complete wave fields within realistic domains. We anticipate that our findings will drive further exploration of deep neural operator methods, advancing research in immersive user experiences within virtual environments.

Channel foundation models assume access to fully observed channels, an assumption that fails in deployment. We introduce PilotWiMAE, a self-supervised framework whose encoder ingests noisy pilot observations directly and whose attention factorizes along the axis separating temporal from joint space-frequency processing, an inductive bias inspired by the physics of the problem. Pilot input shrinks the observation space by up to two orders of magnitude and also removes the unrealistic assumption of full-CSI availability while incurring lower latency. The factorized design generates robust representations by exploiting the separable channel structure and allows a pretraining mask ratio of 99%. We pair patch-normalized reconstruction, which captures small-scale fading structure, with an auxiliary scale loss that recovers the large-scale fading features, and use an AWGN curriculum to match pilot noise at pretraining and deployment. Pretrained solely on 3.5\,GHz and evaluated at 28\,GHz across in-distribution and out-of-distribution settings, PilotWiMAE's cross-frequency beam selection and channel characterization beat supervised baselines despite operating on a smaller observation space. To weaken the coupling between decoder capacity and representation quality, we further propose a decoder-centric pretraining stage following the encoder-decoder joint pretraining, which allows PilotWiMAE to demonstrate competitive channel estimation without sacrificing representation quality. To foster further work in this direction, we release the PilotWiMAE pretrained weights and training pipeline, together with CSIGen, our Sionna-based ray-tracing channel-generation tool, and the channel datasets used in this work.

We propose Reference-Based Modulation (RB-Modulation), a new plug-and-play solution for training-free personalization of diffusion models. Existing training-free approaches exhibit difficulties in (a) style extraction from reference images in the absence of additional style or content text descriptions, (b) unwanted content leakage from reference style images, and (c) effective composition of style and content. RB-Modulation is built on a novel stochastic optimal controller where a style descriptor encodes the desired attributes through a terminal cost. The resulting drift not only overcomes the difficulties above, but also ensures high fidelity to the reference style and adheres to the given text prompt. We also introduce a cross-attention-based feature aggregation scheme that allows RB-Modulation to decouple content and style from the reference image. With theoretical justification and empirical evidence, our framework demonstrates precise extraction and control of content and style in a training-free manner. Further, our method allows a seamless composition of content and style, which marks a departure from the dependency on external adapters or ControlNets.

We propose a neural network for both forward and inverse continuous nonlinear Fourier transforms, NFT and INFT respectively. We demonstrate the network's capability to perform NFT and INFT for a random mix of NFDM-QAM signals. The network transformations (NFT and INFT) exhibit true characteristics of these transformations; they are significantly different for low and high-power input pulses. The network shows adequate accuracy with an RMSE of 5e-3 for forward and 3e-2 for inverse transforms. We further show that the trained network can be used to perform general nonlinear Fourier transforms on arbitrary pulses beyond the training pulse types.

Large language models (LLMs) deliver strong performance, but their high compute and memory costs make deployment difficult in resource-constrained scenarios. Weight-only post-training quantization (PTQ) is appealing, as it reduces memory usage and enables practical speedup without low-bit operators or specialized hardware. However, accuracy often degrades significantly in weight-only PTQ at sub-4-bit precision, and our analysis identifies two main causes: (1) down-projection matrices are a well-known quantization bottleneck, but maintaining their fidelity often requires extra bit-width; (2) weight quantization induces activation deviations, but effective correction strategies remain underexplored. To address these issues, we propose D^2Quant, a novel weight-only PTQ framework that improves quantization from both the weight and activation perspectives. On the weight side, we design a Dual-Scale Quantizer (DSQ) tailored to down-projection matrices, with an absorbable scaling factor that significantly improves accuracy without increasing the bit budget. On the activation side, we propose Deviation-Aware Correction (DAC), which incorporates a mean-shift correction within LayerNorm to mitigate quantization-induced activation distribution shifts. Extensive experiments across multiple LLM families and evaluation metrics show that D^2Quant delivers superior performance for weight-only PTQ at sub-4-bit precision. The code and models will be available at https://github.com/XIANGLONGYAN/D2Quant.

Large language models (LLMs) and multimodal models have become powerful general-purpose reasoning systems. However, radio-frequency (RF) signals, which underpin wireless systems, are still not natively supported by these models. Existing LLM-based approaches for telecom focus mainly on text and structured data, while conventional RF deep-learning models are built separately for specific signal-processing tasks, highlighting a clear gap between RF perception and high-level reasoning. To bridge this gap, we introduce RF-GPT, a radio-frequency language model (RFLM) that utilizes the visual encoders of multimodal LLMs to process and understand RF spectrograms. In this framework, complex in-phase/quadrature (IQ) waveforms are mapped to time-frequency spectrograms and then passed to pretrained visual encoders. The resulting representations are injected as RF tokens into a decoder-only LLM, which generates RF-grounded answers, explanations, and structured outputs. To train RF-GPT, we perform supervised instruction fine-tuning of a pretrained multimodal LLM using a fully synthetic RF corpus. Standards-compliant waveform generators produce wideband scenes for six wireless technologies, from which we derive time-frequency spectrograms, exact configuration metadata, and dense captions. A text-only LLM then converts these captions into RF-grounded instruction-answer pairs, yielding roughly 12,000 RF scenes and 0.625 million instruction examples without any manual labeling. Across benchmarks for wideband modulation classification, overlap analysis, wireless-technology recognition, WLAN user counting, and 5G NR information extraction, RF-GPT achieves strong multi-task performance, whereas general-purpose VLMs with no RF grounding largely fail.

Deep neural network is difficult to train and this predicament becomes worse as the depth increases. The essence of this problem exists in the magnitude of backpropagated errors that will result in gradient vanishing or exploding phenomenon. We show that a variant of regularizer which utilizes orthonormality among different filter banks can alleviate this problem. Moreover, we design a backward error modulation mechanism based on the quasi-isometry assumption between two consecutive parametric layers. Equipped with these two ingredients, we propose several novel optimization solutions that can be utilized for training a specific-structured (repetitively triple modules of Conv-BNReLU) extremely deep convolutional neural network (CNN) WITHOUT any shortcuts/ identity mappings from scratch. Experiments show that our proposed solutions can achieve distinct improvements for a 44-layer and a 110-layer plain networks on both the CIFAR-10 and ImageNet datasets. Moreover, we can successfully train plain CNNs to match the performance of the residual counterparts. Besides, we propose new principles for designing network structure from the insights evoked by orthonormality. Combined with residual structure, we achieve comparative performance on the ImageNet dataset.

In this paper, we prove representation bottlenecks of a cascaded convolutional decoder network, considering the capacity of representing different frequency components of an input sample. We conduct the discrete Fourier transform on each channel of the feature map in an intermediate layer of the decoder network. Then, we introduce the rule of the forward propagation of such intermediate-layer spectrum maps, which is equivalent to the forward propagation of feature maps through a convolutional layer. Based on this, we find that each frequency component in the spectrum map is forward propagated independently with other frequency components. Furthermore, we prove two bottlenecks in representing feature spectrums. First, we prove that the convolution operation, the zero-padding operation, and a set of other settings all make a convolutional decoder network more likely to weaken high-frequency components. Second, we prove that the upsampling operation generates a feature spectrum, in which strong signals repetitively appears at certain frequencies.

Learning-based semantic communication is vulnerable to adversarial perturbations introduced before semantic encoding or over wireless channels. This paper proposes TwinViT-DeepJSCC, a preventive-corrective semantic image transceiver operating under a fixed channel-use budget. Two Vision Transformer (ViT)-based deep joint source-channel coding (DeepJSCC) branches learn complementary latent representations protected by sensitivity-aware masking. At the receiver, confidence-aware fusion, blind corruption-severity estimation, and signal-to-noise ratio (SNR)-severity-conditioned denoising diffusion implicit model (DDIM) purification mitigate residual corruption without requiring attack metadata. Experiments on the Canadian Institute for Advanced Research 100-class (CIFAR-100) dataset consider fast gradient sign method (FGSM), projected gradient descent (PGD), natural evolution strategies (NES), and Carlini-Wagner (CW) source-domain attacks, as well as random jamming and channel-aware adversarial waveforms over additive white Gaussian noise (AWGN) and block-flat Rayleigh fading. Under matched channel-use and attack budgets, TwinViT-DeepJSCC achieves maximum peak signal-to-noise ratio (PSNR) gains of approximately 9.5 dB under 20-step PGD and 10.8 dB under channel-aware waveform attacks over block-flat Rayleigh fading. Under PGD, it also improves Top-1 accuracy by up to approximately 38 percentage points over the undefended baseline and 13 percentage points over the strongest competing defense. Ablation results confirm the complementary contributions of the proposed transmitter- and receiver-side mechanisms.

Recent advancements in state-space models (SSMs) have showcased effective performance in modeling long-range dependencies with subquadratic complexity. However, pure SSM-based models still face challenges related to stability and achieving optimal performance on computer vision tasks. Our paper addresses the challenges of scaling SSM-based models for computer vision, particularly the instability and inefficiency of large model sizes. To address this, we introduce a Modulated Group Mamba layer which divides the input channels into four groups and applies our proposed SSM-based efficient Visual Single Selective Scanning (VSSS) block independently to each group, with each VSSS block scanning in one of the four spatial directions. The Modulated Group Mamba layer also wraps the four VSSS blocks into a channel modulation operator to improve cross-channel communication. Furthermore, we introduce a distillation-based training objective to stabilize the training of large models, leading to consistent performance gains. Our comprehensive experiments demonstrate the merits of the proposed contributions, leading to superior performance over existing methods for image classification on ImageNet-1K, object detection, instance segmentation on MS-COCO, and semantic segmentation on ADE20K. Our tiny variant with 23M parameters achieves state-of-the-art performance with a classification top-1 accuracy of 83.3% on ImageNet-1K, while being 26% efficient in terms of parameters, compared to the best existing Mamba design of same model size. Our code and models are available at: https://github.com/Amshaker/GroupMamba.

Single-image reflection separation is fundamentally challenged by the entanglement of transmission and reflection layers under complex image formation processes. Existing approaches largely rely on simplified assumptions or independent modeling, limiting their ability to handle real-world scenarios. In this work, we revisit the problem from a unified perspective and identify a key issue of existing approaches, i.e., the widely adopted linear composition model in the sRGB domain fails to capture the nonlinear coupling introduced by real-world image signal processing pipelines. To address this, we introduce a learnable nonlinear superposition model that more faithfully characterizes layer interactions and improves decomposition fidelity. Building upon this formulation, we propose a generalized dual-stream interactive framework that explicitly models bidirectional dependencies between transmission and reflection through feature exchange. This framework unifies activation-, gating-, and attention-based interaction mechanisms, and is compatible with both CNN and Transformer backbones. Extensive experiments on diverse real-world benchmarks demonstrate that the proposed approach achieves superior performance with strong generalization capability. More importantly, our study reveals that reflection separation is not about undoing a linear mixture, but about learning nonlinear formation and interaction}, offering new insights into the design of principled image decomposition models. Code and models are publicly available at https://mingcv.github.io/DIRS-Page.

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

In this work, we develop a joint denoising and feedback strategy for channel state information in frequency division duplex systems. In such systems, the biggest challenge is the overhead incurred when the mobile terminal has to send the downlink channel state information or corresponding partial information to the base station, where the complete estimates can subsequently be restored. To this end, we propose a novel learning-based framework for denoising and compression of channel estimates. Unlike existing studies, we extend a recently proposed approach and show that based solely on noisy uplink data available at the base station, it is possible to learn an autoencoder neural network that generalizes to downlink data. Subsequently, half of the autoencoder can be offloaded to the mobile terminals to generate channel feedback there as efficiently as possible, without any training effort at the terminals or corresponding transfer of training data. Numerical simulations demonstrate the excellent performance of the proposed method.

Intelligent surfaces represent a breakthrough technology capable of customizing the wireless channel cost-effectively. However, the existing works generally focus on planar wavefront, neglecting near-field spherical wavefront characteristics caused by large array aperture and high operation frequencies in the terahertz (THz). Additionally, the single-layer reconfigurable intelligent surface (RIS) lacks the signal processing ability to mitigate the computational complexity at the base station (BS). To address this issue, we introduce a novel stacked intelligent metasurfaces (SIM) comprised of an array of programmable metasurface layers. The SIM aims to substitute conventional digital baseband architecture to execute computing tasks with ultra-low processing delay, albeit with a reduced number of radio-frequency (RF) chains and low-resolution digital-to-analog converters. In this paper, we present a SIM-aided multiuser multiple-input single-output (MU-MISO) near-field system, where the SIM is integrated into the BS to perform beamfocusing in the wave domain and customize an end-to-end channel with minimized inter-user interference. Finally, the numerical results demonstrate that near-field communication achieves superior spatial gain over the far-field, and the SIM effectively suppresses inter-user interference as the wireless signals propagate through it.

Radio-frequency (RF) data synthesis predicts the received signal given transmitter and receiver positions, and is essential for wireless applications. Recent 3D Gaussian Splatting (3DGS)-based methods achieve efficient synthesis at any transmitter but only for a fixed receiver. Therefore, supporting N receivers in one scene requires N independent models and precludes prediction at unseen receivers. We present RxGS, which achieves receiver-generalizable synthesis within a single unified model. Our key insight is that scene geometry is receiver-independent while directional radiance is not: a first stage learns shared 3D Gaussian geometry, and a second stage freezes it and learns directional radiance conditioned on receiver position. A global conditioning branch captures shared receiver-dependent effects across the scene, while a local branch models per-scatterer variations from the receiver's geometry and occlusion. A multi-receiver CUDA rasterizer further batches rendering across all N receivers. Evaluated across various RF datasets, RxGS matches or improves over per-receiver baselines with a single shared model and generalizes to receivers unseen during training within the scene, cutting training cost by up to 45times, inference cost by 7.6times, and storage by Ntimes.

Neural operator surrogates (NO) approximate PDE solutions orders of magnitude faster than numerical solvers, but suffer from spectral bias: high-frequency content is systematically attenuated, limiting reliability where fine-scale structure matters. Sparse sensor measurements of the field are often available too, offering pointwise accuracy without spectral distortion but covering only a small fraction of the domain. We address this by treating NO predictions as auxiliary observations in a diffusion posterior sampling framework. Our method, FreqNO-DPS (https://github.com/niccoloperrone/FreqNO-DPS), combines an unconditional score-based diffusion prior, trained on high-fidelity simulations, with diffusion posterior sampling (DPS) conditioned on sparse observations and guided by a frozen neural operator. Naive integration reintroduces the surrogate's spectral bias; we resolve this with a closed-form, spectrally shaped guidance score that weights the surrogate by its frequency-dependent accuracy and needs no denoiser backpropagation. A distribution-free analysis bounds the approximation error across the frequency-diffusion-time plane and shows the guidance's frequency dependence is preserved regardless of distributional assumptions. On 3D elastic wavefield prediction at 5% and 2% sensor coverage, the method reaches near-zero spectral bias across all bands, where both the surrogate and sensor-only DPS show systematic high-frequency attenuation. Isotropic guidance, the natural baseline, improves pointwise accuracy but carries the bias into the posterior nearly intact, confirming that frequency-dependent calibration is essential, not merely beneficial. The framework needs only paired surrogate/reference data and exploits no problem-specific structure beyond the residual's approximate spectral diagonality, verifiable for new surrogates via the coherence diagnostic we provide.

Multimodal Large Language Models have demonstrated powerful cross-modal understanding and reasoning capabilities in general domains. However, in the electromagnetic (EM) domain, they still face challenges such as data scarcity and insufficient integration of domain knowledge. This paper proposes PReD, the first foundation model for the EM domain that covers the intelligent closed-loop of "perception, recognition, decision-making." We constructed a high-quality multitask EM dataset, PReD-1.3M, and an evaluation benchmark, PReD-Bench. The dataset encompasses multi-perspective representations such as raw time-domain waveform, frequency-domain spectrograms, and constellation diagrams, covering typical features of communication and radar signals. It supports a range of core tasks, including signal detection, modulation recognition, parameter estimation, protocol recognition, radio frequency fingerprint recognition, and anti-jamming decision-making. PReD adopts a multi-stage training strategy that unifies multiple tasks for EM signals. It achieves closed-loop optimization from end-to-end signal understanding to language-driven reasoning and decision-making, significantly enhancing EM domain expertise while maintaining general multimodal capabilities. Experimental results show that PReD achieves state-of-the-art performance on PReD-Bench constructed from both open-source and self-collected signal datasets. These results collectively validate the feasibility and potential of vision-aligned foundation models in advancing the understanding and reasoning of EM signals.

With the rapid development of deep learning (DL) in recent years, automatic modulation recognition (AMR) with DL has achieved high accuracy. However, insufficient training signal data in complicated channel environments and large-scale DL models are critical factors that make DL methods difficult to deploy in practice. Aiming to these problems, we propose a novel neural network named convolution-linked signal transformer (ClST) and a novel knowledge distillation method named signal knowledge distillation (SKD). The ClST is accomplished through three primary modifications: a hierarchy of transformer containing convolution, a novel attention mechanism named parallel spatial-channel attention (PSCA) mechanism and a novel convolutional transformer block named convolution-transformer projection (CTP) to leverage a convolutional projection. The SKD is a knowledge distillation method to effectively reduce the parameters and complexity of neural networks. We train two lightweight neural networks using the SKD algorithm, KD-CNN and KD-MobileNet, to meet the demand that neural networks can be used on miniaturized devices. The simulation results demonstrate that the ClST outperforms advanced neural networks on all datasets. Moreover, both KD-CNN and KD-MobileNet obtain higher recognition accuracy with less network complexity, which is very beneficial for the deployment of AMR on miniaturized communication devices.

Learned image compression (LIC) has gained traction as an effective solution for image storage and transmission in recent years. However, existing LIC methods are redundant in latent representation due to limitations in capturing anisotropic frequency components and preserving directional details. To overcome these challenges, we propose a novel frequency-aware transformer (FAT) block that for the first time achieves multiscale directional ananlysis for LIC. The FAT block comprises frequency-decomposition window attention (FDWA) modules to capture multiscale and directional frequency components of natural images. Additionally, we introduce frequency-modulation feed-forward network (FMFFN) to adaptively modulate different frequency components, improving rate-distortion performance. Furthermore, we present a transformer-based channel-wise autoregressive (T-CA) model that effectively exploits channel dependencies. Experiments show that our method achieves state-of-the-art rate-distortion performance compared to existing LIC methods, and evidently outperforms latest standardized codec VTM-12.1 by 14.5%, 15.1%, 13.0% in BD-rate on the Kodak, Tecnick, and CLIC datasets.

Understanding the wireless spectrum is a fundamen- tal requirement for intelligent communication systems, however, interpreting spectrograms requires extracting multiple physical attributes and reasoning about signal structure, which is a capability that is not achieved by traditional ML approaches. Recent advances in vision-language models (VLMs) demonstrated the possibility of learning such interpretation capabilities directly from data. This paper investigates whether VLMs can learn this capability from synthetic data alone, and more importantly, whether such learned representations generalize to real over-the- air RF environments. To address this question, we introduce RF-Analyzer, an SDR-to-AI analysis platform that integrates live spectrum captures associated with the corresponding VLM- based interpretation, enabling direct evaluation of VLMs outputs on live over-the-air signals. Using this platform, we assess a model trained exclusively on synthetic spectrogram data with general-purpose baselines. To enable systematic analysis, we establish a benchmark framework comprising three metrics, Physical Attribute Extraction Score (PAES), Prompt Leakage Rate (PLR), and hallucination count, to assess signal understanding and grounding. The obtained results demonstrate that VLMs trained on synthetic spectrogram data can generalize to real RF environments, particularly for extracting physical signal attributes such as spectral occupancy, temporal behavior, and SNR. This indicates that synthetic data is sufficient for learning transferable representations of RF signal structure. However, this generalization is limited due to the fact that synthetic training does not provide reliable semantic grounding without contextual priors. In particular, generalization breaks under conditions that are not covered in the synthetic distribution, particularly low-SNR regimes

Semantic communications (SemCom) is a promising task-oriented paradigm in which semantic features exhibit non-uniform importance. Consequently, unequal error protection (UEP), which allocates resources based on semantic importance, plays a pivotal role in maximizing system utility. However, most existing schemes adopt passive importance evaluation, which neither proactively reshapes the importance distribution nor explores its impact on UEP performance. In this paper, we propose a novel importance-ordered semantic feature restructuring (ISFR) scheme that proactively enforces a descending importance hierarchy and jointly optimizes multi-dimensional resources to improve system utility. Specifically, modules with decreasing retention probabilities and increasing distortion levels are employed, which drive the model to concentrate key semantics into front-end features and thus strengthen importance differentiation. Moreover, a joint optimization problem that jointly optimizes channel matching, feature selection, modulation schemes, and power allocation is formulated to minimize the importance-weighted total semantic distortion. To solve this non-convex problem, a hierarchical decoupling strategy is proposed, which decomposes it into four tractable subproblems. This approach leverages the ordered prior to drastically prune the search space for feature selection and modulation, while integrating greedy-based channel matching and convex power allocation. Simulation results demonstrate that the proposed ISFR scheme outperforms traditional uniform importance-based schemes under harsh channel conditions and limited resources, validating the significant robustness improvement enabled by the concentration of key semantic information.

Sixth generation (6G) systems require environment-aware communication, driven by native artificial intelligence (AI) and integrated sensing and communication (ISAC). Radio maps (RMs), providing spatially continuous channel information, are key enablers. However, generating high-fidelity RM ground truth via electromagnetic (EM) simulations is computationally intensive, motivating machine learning (ML)-based RM construction. The effectiveness of these data-driven methods depends on large-scale, high-quality training data. Current public datasets often focus on single-input single-output (SISO) and limited information, such as path loss, which is insufficient for advanced multi-input multi-output (MIMO) systems requiring detailed channel state information (CSI). To address this gap, this paper presents UrbanMIMOMap, a novel large-scale urban MIMO CSI dataset generated using high-precision ray tracing. UrbanMIMOMap offers comprehensive complex CSI matrices across a dense spatial grid, going beyond traditional path loss data. This rich CSI is vital for constructing high-fidelity RMs and serves as a fundamental resource for data-driven RM generation, including deep learning. We demonstrate the dataset's utility through baseline performance evaluations of representative ML methods for RM construction. This work provides a crucial dataset and reference for research in high-precision RM generation, MIMO spatial performance, and ML for 6G environment awareness. The code and data for this work are available at: https://github.com/UNIC-Lab/UrbanMIMOMap.

We propose a beam codebook design for integrated sensing and communication (ISAC) that reduces self-interference (SI) to alleviate analog distortion. Our optimization framework, which considers either tapered beamforming or phased arrays for both analog and hybrid schemes, modifies given reference codebooks such that a certain SI power level is achieved. In contrast to other low-SI codebooks, which often rely on hardly interpretable optimization parameters, we provide design guidelines to obtain sensing performance guarantees by deriving analytical bounds on saturation and analog-to-digital quantization in relation to the multipath SI level. By selecting standard reference codebooks in our simulations, we show how our method substantially improves the signal-to-noise ratio for sensing with little impact on 5G-NR communication.

Artificial transmission lines built with lumped-element inductors and capacitors form the backbone of broadband, nearly quantum-limited traveling-wave parametric amplifiers (TWPAs). However, systematic design methods for TWPAs, and more generally artificial transmission lines, are lacking. Here, I develop a general synthesis framework for lossless artificial transmission lines by borrowing from periodic structure theory and passive network synthesis. These complementary approaches divide the design space: periodic loading synthesis employs spatial modulation of frequency-independent components, while filter synthesis employs frequency-dependent responses in spatially-uniform components. When tailoring transmission lines for parametric processes, nonlinear elements are added, typically nonlinear inductances in superconducting circuits, while ensuring energy and momentum conservation between interacting tones. Applying this framework, I design a kinetic inductance TWPA with a novel phase-matching architecture, and a backward-pumped Josephson TWPA exploiting an ambidextrous i.e., right-left-handed transmission line.

Automatic modulation classification (AMC) is a technology that identifies a modulation scheme without prior signal information and plays a vital role in various applications, including cognitive radio and link adaptation. With the development of deep learning (DL), DL-based AMC methods have emerged, while most of them focus on reducing computational complexity in a centralized structure. This centralized learning-based AMC (CentAMC) violates data privacy in the aspect of direct transmission of client-side raw data. Federated learning-based AMC (FedeAMC) can bypass this issue by exchanging model parameters, but causes large resultant latency and client-side computational load. Moreover, both CentAMC and FedeAMC are vulnerable to large-scale noise occured in the wireless channel between the client and the server. To this end, we develop a novel AMC method based on a split learning (SL) framework, coined SplitAMC, that can achieve high accuracy even in poor channel conditions, while guaranteeing data privacy and low latency. In SplitAMC, each client can benefit from data privacy leakage by exchanging smashed data and its gradient instead of raw data, and has robustness to noise with the help of high scale of smashed data. Numerical evaluations validate that SplitAMC outperforms CentAMC and FedeAMC in terms of accuracy for all SNRs as well as latency.

Radiomap blind prediction aims to infer radiomaps from observable representations of the propagation environment and base station configuration without field measurements. In practice, the observable representations are inherently incomplete. Thus, the target radiomap is not fully determined by the inputs when generalizing to unseen configurations or environments. Under incomplete observation, we establish a population-level theory of deterministic radiomap blind prediction that identifies the conditional mean as its optimal target and separates prediction error into reducible predictor approximation and irreducible uncertainty caused by missing physical information. The framework further characterizes the train-test risk gap and the uncertainty reduction enabled by observation enrichment. Building on it, we reveal the dual role of propagation priors: they provide physically grounded guidance, yet their implementable forms may bias the attainable predictor. This motivates RadioDecomp, which treats a prior-guided predictor as a correctable base and learns its remaining predictable discrepancy through residual refinement. To evaluate RadioDecomp across distinct propagation-prior designs, we instantiate it with a feature-guided monolithic base and a LoS-Shadow structured base, yielding RadioFR and RadioLSR, respectively. Across random, cross-configuration, and cross-environment settings, experiments confirm the benefit of propagation-related representations and show that both instantiations improve upon their respective bases. Further controlled studies on base capacity, training-support coverage, and observation coarsening corroborate the proposed analysis.

Low frequency oscillator (LFO) driven audio effects such as phaser, flanger, and chorus, modify an input signal using time-varying filters and delays, resulting in characteristic sweeping or widening effects. It has been shown that these effects can be modeled using neural networks when conditioned with the ground truth LFO signal. However, in most cases, the LFO signal is not accessible and measurement from the audio signal is nontrivial, hindering the modeling process. To address this, we propose a framework capable of extracting arbitrary LFO signals from processed audio across multiple digital audio effects, parameter settings, and instrument configurations. Since our system imposes no restrictions on the LFO signal shape, we demonstrate its ability to extract quasiperiodic, combined, and distorted modulation signals that are relevant to effect modeling. Furthermore, we show how coupling the extraction model with a simple processing network enables training of end-to-end black-box models of unseen analog or digital LFO-driven audio effects using only dry and wet audio pairs, overcoming the need to access the audio effect or internal LFO signal. We make our code available and provide the trained audio effect models in a real-time VST plugin.

A multiplicative dual-encoder network computes a real-valued output for a pair of inputs as the inner product of their separate encodings. This architecture has been developed independently in operator learning, bipartite matching, contrastive vision-language models, retrieval, and other areas, yet no unified theory guides the basic design decisions: how many interaction modes to represent, how to normalize the encoders, and when the architecture should be avoided. We provide such a foundation by introducing the class of functions of low interaction rank, a class whose intrinsic complexity is measured by its interaction spectrum. Within this framework, approximation error decomposes into a spectral truncation term and an encoder-realization term; sample complexity is governed by the sum of the two encoder complexities rather than their product; and a usability criterion based on spectral decay determines when the architecture can succeed. The same framework exposes a central identifiability problem: the encoders are defined only up to a linear gauge symmetry that leaves the learned coordinates arbitrary. We show that normalization is gauge fixing and that whitening pins the interaction modes up to permutation and sign, thereby explaining the uninterpretability of contrastive dimensions and providing a constructive remedy. Experiments on synthetic kernels, operator learning, and CLIP models validate the theoretical predictions: spectral decay rates match the predicted scaling, whitening recovers the true modes, and independently trained CLIP models are related by a single rotation which, after removal by whitening, exposes interpretable concept axes. The code of this paper is provided at https://github.com/RS2002/Mul-Net .

The rapid evolution of wireless communication systems has created complex electromagnetic environments where multiple cellular standards (2G/3G/4G/5G) coexist, necessitating advanced signal source separation techniques. We present RFSS (RF Signal Source Separation), a comprehensive open-source dataset containing 52,847 realistic multi-standard RF signal samples with complete 3GPP standards compliance. Our framework generates authentic baseband signals for GSM, UMTS, LTE, and 5G NR with advanced channel modeling including multipath fading, MIMO processing up to 8 by 8 antennas, and realistic interference scenarios. Experimental validation demonstrates superior performance of CNN-LSTM architectures achieving 26.7 dB SINR improvement in source separation tasks, significantly outperforming traditional ICA (15.2 dB) and NMF (18.3 dB) approaches. The RFSS dataset enables reproducible research in RF source separation, cognitive radio, and machine learning applications while maintaining complete open-source accessibility

We introduce a general-purpose conditioning method for neural networks called FiLM: Feature-wise Linear Modulation. FiLM layers influence neural network computation via a simple, feature-wise affine transformation based on conditioning information. We show that FiLM layers are highly effective for visual reasoning - answering image-related questions which require a multi-step, high-level process - a task which has proven difficult for standard deep learning methods that do not explicitly model reasoning. Specifically, we show on visual reasoning tasks that FiLM layers 1) halve state-of-the-art error for the CLEVR benchmark, 2) modulate features in a coherent manner, 3) are robust to ablations and architectural modifications, and 4) generalize well to challenging, new data from few examples or even zero-shot.

Successive cancellation perturbation-enhanced (SCP) decoding improves the performance of finite-length polar codes by performing multiple SC decoding attempts with receiver-side perturbations. However, many existing perturbation schemes generate or update subsequent perturbations according to the outcomes of previous decoding attempts, resulting in additional decoding latency. In this paper, we propose an offline variance design (OVD) method for parallel SCP (PSCP) decoding of short- and medium-length polar codes. First, we formulate the exact recovery objective conditioned on ordinary SC failure and classify failed frames by the position of the first genie-aided intrinsic error and the number of subsequent intrinsic errors. We also derive a consistent Gaussian representation of the perturbed channel that preserves min-sum SC hard decisions. Second, we construct a class-based approximation of the recovery objective using Gaussian approximation and backward recursions, accounting for both error correction and new errors introduced by perturbations. We prove that both the exact and analytical objectives are nondecreasing and exhibit diminishing marginal gains as independent branches are added. Third, we develop a greedy algorithm to select variances from a finite candidate set for a given code, signal-to-noise ratio (SNR), and number of perturbation branches. All variances are determined offline, allowing the original SC branch and all perturbation branches to start simultaneously. Simulations for rate-1/2 polar codes of lengths 64, 128, 256, and 512 show that OVD-PSCP achieves lower block error rates (BLERs) than conventional SCP with the same number of perturbation branches. The gains are larger for shorter codes and increase as the number of perturbation branches grows.

Reconfigurable intelligent surfaces (RISs) have become one of the key technologies in 6G wireless communications. By configuring the reflection beamforming codebooks, RIS focuses signals on target receivers. In this paper, we investigate the codebook configuration for 1-bit RIS-aided systems. We propose a novel learning-based method built upon the advanced methodology of implicit neural representations. The proposed model learns a continuous and differentiable coordinate-to-codebook representation from samplings. Our method only requires the information of the user's coordinate and avoids the assumption of channel models. Moreover, we propose an encoding-decoding strategy to reduce the dimension of codebooks, and thus improve the learning efficiency of the proposed method. Experimental results on simulation and measured data demonstrated the remarkable advantages of the proposed method.

Post-training quantization (PTQ) is widely regarded as one of the most efficient compression methods practically, benefitting from its data privacy and low computation costs. We argue that an overlooked problem of oscillation is in the PTQ methods. In this paper, we take the initiative to explore and present a theoretical proof to explain why such a problem is essential in PTQ. And then, we try to solve this problem by introducing a principled and generalized framework theoretically. In particular, we first formulate the oscillation in PTQ and prove the problem is caused by the difference in module capacity. To this end, we define the module capacity (ModCap) under data-dependent and data-free scenarios, where the differentials between adjacent modules are used to measure the degree of oscillation. The problem is then solved by selecting top-k differentials, in which the corresponding modules are jointly optimized and quantized. Extensive experiments demonstrate that our method successfully reduces the performance drop and is generalized to different neural networks and PTQ methods. For example, with 2/4 bit ResNet-50 quantization, our method surpasses the previous state-of-the-art method by 1.9%. It becomes more significant on small model quantization, e.g. surpasses BRECQ method by 6.61% on MobileNetV2*0.5.

Current applications of self-supervised learning to wireless channel representation often borrow paradigms developed for text and image processing, without fully addressing the unique characteristics and constraints of wireless communications. To bridge this gap, we introduce ContraWiMAE, Wireless Contrastive Masked Autoencoder, a transformer-based foundation model that unifies masked reconstruction and masked contrastive learning for wireless channel representation. Our key innovation is a new wireless-inspired contrastive objective that exploits the inherent characteristics of wireless environment, including noise, fading, and partial observability, as natural augmentation. Through extensive evaluation on unseen scenarios and conditions, we demonstrate our method's effectiveness in multiple downstream tasks, including cross-frequency beam selection, line-of-sight detection, and channel estimation. ContraWiMAE exhibits superior linear separability and adaptability in diverse wireless environments, demonstrating exceptional data efficiency and competitive performance compared with supervised baselines under challenging conditions. Comparative evaluations against a state-of-the-art wireless channel foundation model confirm the superior performance and data efficiency of our approach, highlighting its potential as a powerful baseline for future research in self-supervised wireless channel representation learning. To foster further work in this direction, we release the model weights and training pipeline for ContraWiMAE.

This paper investigates a Stacked Intelligent Metasurfaces (SIM)-assisted Integrated Sensing and Communications (ISAC) system. An extended target model is considered, where the BS aims to estimate the complete target response matrix relative to the SIM. Under the constraints of minimum Signal-to-Interference-plus-Noise Ratio (SINR) for the communication users (CUs) and maximum transmit power, we jointly optimize the transmit beamforming at the base station (BS) and the end-to-end transmission matrix of the SIM, to minimize the Cramér-Rao Bound (CRB) for target estimation. Effective algorithms such as the alternating optimization (AO) and semidefinite relaxation (SDR) are employed to solve the non-convex SINR-constrained CRB minimization problem. Finally, we design and build an experimental platform for SIM, and evaluate the performance of the proposed algorithms for communication and sensing tasks.

Orthogonalized-update optimizers such as Muon improve training of matrix-valued parameters, but existing extensions typically either rescale updates after orthogonalization or use heavier whitening-based preconditioners before it. We introduce {\method}, a lightweight family of pre-orthogonalization equilibration schemes for Muon with three forms: two-sided row/column normalization (RC), row normalization (R), and column normalization (C). By rebalancing the momentum matrix before finite-step Newton--Schulz orthogonalization, {\method} improves the geometry seen by orthogonalization. We show that finite-step orthogonalization is governed by the input spectrum, especially stable rank and condition number, and that row/column normalization acts as a zeroth-order surrogate for whitening. For hidden matrix weights, R is the default variant. Theoretically, {\method} (R) retains the standard mathcal O(T^{-1/4}) Muon-type nonconvex stationarity guarantee with decoupled weight decay and a horizon-free diminishing learning-rate schedule, and extends it to finite-step NS5 up to an explicit inexactness constant. In LLaMA2 pretraining on C4, {\method} (R) consistently outperforms Muon on 130M, 350M, and 1B models, with faster convergence and lower validation perplexity. The code is available at the https://github.com/MaeChd/muon-eq{MuonEq codebase}.

The upper 6 GHz (U6G) band with XL-MIMO is a key enabler for sixth-generation wireless systems, yet intelligent radiomap prediction for such systems remains challenging. Existing datasets support only small-scale arrays (up to 8x8) with predominantly isotropic antennas, far from the 1024-element directional arrays envisioned for 6G. Moreover, current methods encode array configurations as scalar parameters, forcing neural networks to extrapolate array-specific radiation patterns, which fails when predicting radiomaps for configurations absent from training data. To jointly address data scarcity and generalization limitations, this paper advances XL-MIMO radiomap prediction from three aspects. To overcome data limitations, we construct the first XL-MIMO radiomap dataset containing 78400 radiomaps across 800 urban scenes, five frequency bands (1.8-6.7 GHz), and nine array configurations up to 32x32 uniform planar arrays with directional elements. To enable systematic evaluation, we establish a comprehensive benchmark framework covering practical scenarios from coverage estimation without field measurements to generalization across unseen configurations and environments. To enable generalization to arbitrary beam configurations without retraining, we propose the beam map, a physics-informed spatial feature that analytically computes array-specific coverage patterns. By decoupling deterministic array radiation from data learned multipath propagation, beam maps shift generalization from neural network extrapolation to physics-based computation. Integrating beam maps into existing architectures reduces mean absolute error by up to 60.0% when generalizing to unseen configurations and up to 50.5% when transferring to unseen environments. The complete dataset and code are publicly available at https://lxj321.github.io/MulticonfigRadiomapDataset/.

Real-image super-resolution (Real-ISR) seeks to recover HR images from LR inputs with mixed, unknown degradations. While diffusion models surpass GANs in perceptual quality, they under-reconstruct high-frequency (HF) details due to a low-frequency (LF) bias and a depth-wise "low-first, high-later" hierarchy. We introduce FRAMER, a plug-and-play training scheme that exploits diffusion priors without changing the backbone or inference. At each denoising step, the final-layer feature map teaches all intermediate layers. Teacher and student feature maps are decomposed into LF/HF bands via FFT masks to align supervision with the model's internal frequency hierarchy. For LF, an Intra Contrastive Loss (IntraCL) stabilizes globally shared structure. For HF, an Inter Contrastive Loss (InterCL) sharpens instance-specific details using random-layer and in-batch negatives. Two adaptive modulators, Frequency-based Adaptive Weight (FAW) and Frequency-based Alignment Modulation (FAM), reweight per-layer LF/HF signals and gate distillation by current similarity. Across U-Net and DiT backbones (e.g., Stable Diffusion 2, 3), FRAMER consistently improves PSNR/SSIM and perceptual metrics (LPIPS, NIQE, MANIQA, MUSIQ). Ablations validate the final-layer teacher and random-layer negatives.

Integrated sensing and communication (ISAC) has been recognized as one of the key technologies capable of simultaneously improving communication and sensing services in future wireless networks. Moreover, the introduction of recently developed movable antennas (MAs) has the potential to further increase the performance gains of ISAC systems. Achieving these gains can pose a significant challenge for MA-enabled ISAC systems operating in the near-field due to the corresponding spherical wave propagation. Motivated by this, in this paper we maximize the weighted sum rate (WSR) for communication users while maintaining a minimal sensing requirement in an MA-enabled near-field ISAC system. To achieve this goal, we propose an algorithm that optimizes the sensing receive combiner, the communication precoding matrices, the sensing transmit beamformer and the positions of the users' MAs in an alternating manner. Simulation results show that using MAs in near-field ISAC systems provides a substantial performance advantage compared to near-field ISAC systems with only fixed antennas. Additionally, we demonstrate that the highest WSR is obtained when larger weights are allocated to the users placed closer to the BS, and that the sensing performance is significantly more affected by the minimum sensing signal-to-interference-plus-noise ratio (SINR) threshold compared to the communication performance.

Deep learning approaches for black-box modelling of audio effects have shown promise, however, the majority of existing work focuses on nonlinear effects with behaviour on relatively short time-scales, such as guitar amplifiers and distortion. While recurrent and convolutional architectures can theoretically be extended to capture behaviour at longer time scales, we show that simply scaling the width, depth, or dilation factor of existing architectures does not result in satisfactory performance when modelling audio effects such as fuzz and dynamic range compression. To address this, we propose the integration of time-varying feature-wise linear modulation into existing temporal convolutional backbones, an approach that enables learnable adaptation of the intermediate activations. We demonstrate that our approach more accurately captures long-range dependencies for a range of fuzz and compressor implementations across both time and frequency domain metrics. We provide sound examples, source code, and pretrained models to faciliate reproducibility.

Spectral band replication (SBR) enables bit-efficient coding by generating high-frequency bands from the low-frequency ones. However, it only utilizes coarse spectral features upon a subband-wise signal replication, limiting adaptability to diverse acoustic signals. In this paper, we explore the efficacy of a deep neural network (DNN)-based generative approach for coding the high-frequency bands, which we call neural spectral band generation (n-SBG). Specifically, we propose a DNN-based encoder-decoder structure to extract and quantize the side information related to the high-frequency components and generate the components given both the side information and the decoded core-band signals. The whole coding pipeline is optimized with generative adversarial criteria to enable the generation of perceptually plausible sound. From experiments using AAC as the core codec, we show that the proposed method achieves a better perceptual quality than HE-AAC-v1 with much less side information.

This article investigates signal estimation in wireless transmission (i.e., receive beamforming) from the perspective of statistical machine learning, where the transmit signals may be from an integrated sensing and communication system; that is, 1) signals may be not only discrete constellation points but also arbitrary complex values; 2) signals may be spatially correlated. Particular attention is paid to handling various uncertainties such as the uncertainty of the transmit signal covariance, the uncertainty of the channel matrix, the uncertainty of the channel noise covariance, the existence of channel impulse noises, and the limited sample size of pilots. To proceed, a distributionally robust machine learning framework that is insensitive to the above uncertainties is proposed, which reveals that channel estimation is not a necessary operation. For optimal linear estimation, the proposed framework includes several existing beamformers as special cases such as diagonal loading and eigenvalue thresholding. For optimal nonlinear estimation, estimators are limited in reproducing kernel Hilbert spaces and neural network function spaces, and corresponding uncertainty-aware solutions (e.g., kernelized diagonal loading) are derived. In addition, we prove that the ridge and kernel ridge regression methods in machine learning are distributionally robust against diagonal perturbation in feature covariance.

Indirect Time of Flight LiDARs can indirectly calculate the scene's depth from the phase shift angle between transmitted and received laser signals with amplitudes modulated at a predefined frequency. Unfortunately, this method generates ambiguity in calculated depth when the phase shift angle value exceeds 2pi. Current state-of-the-art methods use raw samples generated using two distinct modulation frequencies to overcome this ambiguity problem. However, this comes at the cost of increasing laser components' stress and raising their temperature, which reduces their lifetime and increases power consumption. In our work, we study two different methods to recover the entire depth range of the LiDAR using fewer raw data sample shots from a single modulation frequency with the support of sensor's gray scale output to reduce the laser components' stress and power consumption.

Radio maps and channel knowledge maps provide reusable propagation knowledge, but a stored map can become locally outdated after persistent changes to doors, partitions, furniture, large equipment, or infrastructure. Motivated by digital-twin state synchronization, we develop an electromagnetic twin that recurrently converts sparse channel measurements into a persistent wireless state, exposes that state to communication queries, and uses its uncertainty to request subsequent measurements. The twin tracks persistent or semi-persistent propagation changes rather than transient human motion or fast fading. Each update is a constrained inverse problem that combines the previous map, a scene graph, and an imperfect physics prior. Measurement consistency with a confidence-calibrated radius and physical gain bounds enforce feasibility, while scene-aware spatial regularization and selective temporal memory preserve propagation boundaries and unchanged regions. Successive convex approximation (SCA), majorization--minimization alternating direction method of multipliers (MM-ADMM), and a low-complexity primal--dual hybrid gradient (LC-PDHG) mode realize the framework at different computational scales, and a local perturbation analysis gives an explicit multi-update tracking recursion. The updated state supports access-point association and codebook beam selection, while change-weighted A-optimal design closes the measurement--update--query loop. Over 500 realizations, the recurrent update remains stable through eight persistent scene events and raises best-beam accuracy from 76.64% to 90.83% as measured-location density grows from 2% to 16%.

Channel prediction is an effective approach for reducing the feedback or estimation overhead in massive multi-input multi-output (m-MIMO) systems. However, existing channel prediction methods lack precision due to model mismatch errors or network generalization issues. Large language models (LLMs) have demonstrated powerful modeling and generalization abilities, and have been successfully applied to cross-modal tasks, including the time series analysis. Leveraging the expressive power of LLMs, we propose a pre-trained LLM-empowered channel prediction method (LLM4CP) to predict the future downlink channel state information (CSI) sequence based on the historical uplink CSI sequence. We fine-tune the network while freezing most of the parameters of the pre-trained LLM for better cross-modality knowledge transfer. To bridge the gap between the channel data and the feature space of the LLM, preprocessor, embedding, and output modules are specifically tailored by taking into account unique channel characteristics. Simulations validate that the proposed method achieves SOTA prediction performance on full-sample, few-shot, and generalization tests with low training and inference costs.

We present Three-Phase Transformer (3PT), a residual-stream structural prior for decoder-only Transformers on a standard SwiGLU + RMSNorm + RoPE + GQA backbone. The hidden vector is partitioned into N equally-sized cyclic channels, each maintained by phase-respecting ops: a per-channel RMSNorm, a 2D Givens rotation between attention and FFN that rotates each channel by theta + i*(2*pi/N), and a head-count constraint aligning GQA heads with the partition. The architecture is a self-stabilizing equilibrium between scrambling and re-imposition, not a bolted-on module. The partition carves out a one-dimensional DC subspace orthogonal to the channels, into which we inject a fixed Gabriel's horn profile r(p) = 1/(p+1) as an absolute-position side-channel composing orthogonally with RoPE's relative-position rotation. The canonical N=3 borrows its metaphor from balanced three-phase AC, where three sinusoids 120 degrees apart sum to zero with no anti-correlated pair. At 123M parameters on WikiText-103, 3PT achieves -7.20% perplexity (-2.62% bits-per-byte) over a matched RoPE-Only baseline at +1,536 parameters (0.00124% of total), with 1.93x step-count convergence speedup (1.64x wall-clock). N behaves as a parameter-sharing knob rather than a unique optimum: at 5.5M an N-sweep over {1,2,3,4,6,8,12} is near-monotone with N=1 winning; at 123M a three-seed sweep finds N=3 and N=1 statistically indistinguishable. The load-bearing mechanism is the channel-partitioned residual stream, per-block rotation, per-phase normalization, and horn DC injection. We characterize (a) self-stabilization of the geometry without explicit enforcement, a novel instance of the conservation-law framework for neural networks; (b) a U-shaped depth profile of rotation-angle drift at 12 layers; (c) orthogonal composition with RoPE, attention, and FFN.

This paper presents a groundbreaking self-improving interference management framework tailored for wireless communications, integrating deep learning with uncertainty quantification to enhance overall system performance. Our approach addresses the computational challenges inherent in traditional optimization-based algorithms by harnessing deep learning models to predict optimal interference management solutions. A significant breakthrough of our framework is its acknowledgment of the limitations inherent in data-driven models, particularly in scenarios not adequately represented by the training dataset. To overcome these challenges, we propose a method for uncertainty quantification, accompanied by a qualifying criterion, to assess the trustworthiness of model predictions. This framework strategically alternates between model-generated solutions and traditional algorithms, guided by a criterion that assesses the prediction credibility based on quantified uncertainties. Experimental results validate the framework's efficacy, demonstrating its superiority over traditional deep learning models, notably in scenarios underrepresented in the training dataset. This work marks a pioneering endeavor in harnessing self-improving deep learning for interference management, through the lens of uncertainty quantification.

Non-cooperative game theory provides a robust framework for analyzing distributed resource allocation in multi-user wireless networks, with Iterative Water-Filling (IWF) emerging as a canonical solution for power control problems. Although classical fixed-point theorems guarantee the existence of a Nash Equilibrium (NE) under mild concavity and compactness conditions, the convergence of practical iterative algorithms to that equilibrium remains a challenging endeavor. This challenge intensifies under varying update schedules, interference regimes, and imperfections such as channel estimation errors or feedback delay. In this paper, we present an in-depth examination of IWF in multi-user systems under three different update schemes: (1) synchronous sequential updates, (2) synchronous simultaneous updates, and (3) totally asynchronous updates. We first formulate the water-filling operator in a multi-carrier environment, then recast the iterative process as a fixed-point problem. Using contraction mapping principles, we demonstrate sufficient conditions under which IWF converges to a unique NE and highlight how spectral radius constraints, diagonal dominance, and careful step-size selection are pivotal for guaranteeing convergence. We further discuss robustness to measurement noise, partial updates, and network scaling to emphasize the practical viability of these schemes. This comprehensive analysis unifies diverse threads in the literature while offering novel insights into asynchronous implementations. Our findings enable network designers to ascertain system parameters that foster both stable convergence and efficient spectrum usage.

In this article, physical layer security (PLS) in an intelligent reflecting surface (IRS) assisted multiple-input multiple-output multiple antenna eavesdropper (MIMOME) system is studied. In particular, we consider a practical scenario without instantaneous channel state information (CSI) of the eavesdropper and assume that the eavesdropping channel is a Rayleigh channel. To reduce the complexity of currently available IRS-assisted PLS schemes, we propose a low-complexity deep learning (DL) based approach to design transmitter beamforming and IRS jointly, where the precoding vector and phase shift matrix are designed to minimize the secrecy outage probability. Simulation results demonstrate that the proposed DL-based approach can achieve a similar performance of that with conventional alternating optimization (AO) algorithms for a significant reduction in the computational complexity.

Although numerous solutions have been proposed for image super-resolution, they are usually incompatible with low-power devices with many computational and memory constraints. In this paper, we address this problem by proposing a simple yet effective deep network to solve image super-resolution efficiently. In detail, we develop a spatially-adaptive feature modulation (SAFM) mechanism upon a vision transformer (ViT)-like block. Within it, we first apply the SAFM block over input features to dynamically select representative feature representations. As the SAFM block processes the input features from a long-range perspective, we further introduce a convolutional channel mixer (CCM) to simultaneously extract local contextual information and perform channel mixing. Extensive experimental results show that the proposed method is 3times smaller than state-of-the-art efficient SR methods, e.g., IMDN, in terms of the network parameters and requires less computational cost while achieving comparable performance. The code is available at https://github.com/sunny2109/SAFMN.

Full-wave electromagnetic (EM) simulation enables accurate patch-antenna analysis but is computationally expensive for large-scale forward prediction and inverse design. We present a mesh-native, physics-augmented graph-learning framework that treats radiation-pattern prediction as signal reconstruction on an irregular surface mesh. For the forward problem, a GPS graph transformer is trained with Physics-Augmented Intermediate Supervision (PAIS), an auxiliary node-level objective that predicts complex surface currents, the physical intermediate linking geometry to radiation. PAIS improves multiple GNN backbones at no inference-time cost, while shuffled-current and non-physical controls show the gain comes from physical correspondence. Direction-conditioned decoding and a differentiable radiation-integral consistency loss further exploit this structure. On an 80,000-sample CST benchmark, GPS+PAIS reaches MSE 0.17 / PSNR 19.67, generalizes to a PCA split, and transfers zero-shot to canonical patches. For inverse design, surrogate-filtered diffusion beats nearest-neighbor retrieval by 32% relative MSE.

Wireless foundation models (WFMs) have recently demonstrated promising capabilities, jointly performing multiple wireless functions and adapting effectively to new environments. However, while current WFMs process only one modality, depending on the task and operating conditions, the most informative modality changes and no single modality is best for all tasks. WFMs should therefore be designed to accept multiple modalities to enable a broader and more diverse range of tasks and scenarios. In this work, we propose and build the first multimodal wireless foundation model capable of processing both raw IQ streams and image-like wireless modalities (e.g., spectrograms and CSI) and performing multiple tasks across both. We introduce masked wireless modeling for the multimodal setting, a self-supervised objective and pretraining recipe that learns a joint representation from IQ streams and image-like wireless modalities. We evaluate the model on five tasks across both modality families: image-based (human activity sensing, RF signal classification, 5G NR positioning) and IQ-based (RF device fingerprinting, interference detection/classification). The multimodal WFM is competitive with single-modality WFMs, and in several cases surpasses their performance. Our results demonstrates the strong potential of developing multimodal WFMs that support diverse wireless tasks across different modalities. We believe this provides a concrete step toward both AI-native 6G and the vision of joint sensing, communication, and localization.

The coexistence of heterogeneous cellular standards (2G-5G) in shared spectrum demands sophisticated RF source separation techniques, yet no public dataset exists for data-driven research on this problem. We present RFSS (RF Signal Source Separation), an open-source dataset of 100,000 multi-source RF signal samples generated with full 3GPP standards compliance. The dataset covers GSM (TS 45.004), UMTS (TS 25.211), LTE (TS 36.211), and 5G NR (TS 38.211), with 2-4 simultaneous sources per sample plus 4,000 single-source reference samples, at 30.72 MHz sample rate. Each sample passes through independent 3GPP TDL multipath fading channels and realistic hardware impairments: carrier frequency offset, I/Q imbalance, phase noise, DC offset, and PA nonlinearity (Rapp model). Two mixing modes are provided: co-channel (all sources at baseband) and adjacent-channel (each source frequency-shifted to its standard-specific carrier). The dataset totals 103 GB in HDF5 format with a 70/15/15 train/validation/test split. We benchmark five methods: FastICA, Frobenius-norm NMF, Conv-TasNet, DPRNN, and a CNN-LSTM baseline, evaluated using permutation-invariant SI-SINR (PI-SI-SINR). Conv-TasNet achieves -21.18 dB PI-SI-SINR on 2-source mixtures versus -34.91 dB for ICA, a 13.7 dB improvement. On co-channel mixtures, Conv-TasNet reaches -12.34 dB versus -28.04 dB for ICA and -16.19 dB for NMF. The dataset and evaluation code are publicly released at submission time.

Deep joint source-channel coding (DeepJSCC) transmits data end-to-end over wireless channels using a neural encoder-decoder, but reconstruction quality can degrade sharply under adversarial perturbations and channel disturbances; no method formally bounds this degradation for DeepJSCC. We present the first bound-propagation framework for verifying DeepJSCC's decoder, bounding worst-case reconstruction error over a given wireless channel's noise region. Current deep neural network (DNN) verifiers do not support three DeepJSCC decoder components: parametric rectified linear activations (PReLU), transposed convolutions, and Rayleigh fading. We extend state-of-the-art techniques for optimization of linear relaxation in DNN verification for PReLU, replace the transposed convolution with its restricted upsample-then-convolution form, and formulate Rayleigh fading as a structural perturbation prepended directly into the decoder, thereby reducing the dimensionality of the verification problem. We also instantiate Lipschitz-regularized global robustness training, denoted GloRo, improving global robustness and enabling tight certification of DeepJSCC models for the first time. On DeepJSCC model for image transmission, this global robustness training procedure combined with structural encoding lowers the median certified bound by up to 41% and certifies about ten times more safe cases (192 against 19) than GloRo with interval encoding at a 10-degree error in channel estimation. Over-the-air validation with an orthogonal frequency-division multiplexing (OFDM) implementation on software-defined radio devices confirm the certificate holds on real hardware, with a worst observed error on radio link at 0.082 against a certified bound of 0.128.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

We give an overview of recent developments in the modeling of radiowave propagation, based on machine learning algorithms. We identify the input and output specification and the architecture of the model as the main challenges associated with machine learning-driven propagation models. Relevant papers are discussed and categorized based on their approach to each of these challenges. Emphasis is given on presenting the prospects and open problems in this promising and rapidly evolving area.

We propose PRISM, an optimizer that enhances first-order spectral descent methods like Muon with partial second-order information. It constructs an efficient, low-rank quasi-second-order preconditioner via innovation-augmented polar decomposition. This mechanism enables PRISM to perform anisotropic spectral shaping, which adaptively suppresses updates in high-variance subspaces while preserving update strength in signal-dominated directions. Crucially, this is achieved with minimal computational overhead and zero additional memory compared to first-order baselines. PRISM demonstrates a practical strategy for integrating curvature-adaptive properties into the spectral optimization paradigm.

Although Maxwell discovered the physical laws of electromagnetic waves 160 years ago, how to precisely model the propagation of an RF signal in an electrically large and complex environment remains a long-standing problem. The difficulty is in the complex interactions between the RF signal and the obstacles (e.g., reflection, diffraction, etc.). Inspired by the great success of using a neural network to describe the optical field in computer vision, we propose a neural radio-frequency radiance field, NeRF^2, which represents a continuous volumetric scene function that makes sense of an RF signal's propagation. Particularly, after training with a few signal measurements, NeRF^2 can tell how/what signal is received at any position when it knows the position of a transmitter. As a physical-layer neural network, NeRF^2 can take advantage of the learned statistic model plus the physical model of ray tracing to generate a synthetic dataset that meets the training demands of application-layer artificial neural networks (ANNs). Thus, we can boost the performance of ANNs by the proposed turbo-learning, which mixes the true and synthetic datasets to intensify the training. Our experiment results show that turbo-learning can enhance performance with an approximate 50% increase. We also demonstrate the power of NeRF^2 in the field of indoor localization and 5G MIMO.

Millimeter-wave (mmWave) and Terahertz (THz)-band communications hold great promise in meeting the growing data-rate demands of next-generation wireless networks, offering abundant bandwidth. To mitigate the severe path loss inherent to these high frequencies and reduce hardware costs, ultra-massive multiple-input multiple-output (UM-MIMO) systems with hybrid beamforming architectures can deliver substantial beamforming gains and enhanced spectral efficiency. However, accurate channel estimation (CE) in mmWave and THz UM-MIMO systems is challenging due to high channel dimensionality and compressed observations from a limited number of RF chains, while the hybrid near- and far-field radiation patterns, arising from large array apertures and high carrier frequencies, further complicate CE. Conventional compressive sensing based frameworks rely on predefined sparsifying matrices, which cannot faithfully capture the hybrid near-field and far-field channel structures, leading to degraded estimation performance. This paper introduces DiffPace, a diffusion-based plug-and-play method for channel estimation. DiffPace uses a diffusion model (DM) to capture the channel distribution based on the hybrid spherical and planar-wave (HPSM) model. By applying the plug-and-play approach, it leverages the DM as prior knowledge, improving CE accuracy. Moreover, DM performs inference by solving an ordinary differential equation, minimizing the number of required inference steps compared with stochastic sampling method. Experimental results show that DiffPace achieves competitive CE performance, attaining -15 dB normalized mean square error (NMSE) at a signal-to-noise ratio (SNR) of 10 dB, with 90\% fewer inference steps compared to state-of-the-art schemes, simultaneously providing high estimation precision and enhanced computational efficiency.

We consider the image transmission problem over a noisy wireless channel via deep learning-based joint source-channel coding (DeepJSCC) along with a denoising diffusion probabilistic model (DDPM) at the receiver. Specifically, we are interested in the perception-distortion trade-off in the practical finite block length regime, in which separate source and channel coding can be highly suboptimal. We introduce a novel scheme that utilizes the range-null space decomposition of the target image. We transmit the range-space of the image after encoding and employ DDPM to progressively refine its null space contents. Through extensive experiments, we demonstrate significant improvements in distortion and perceptual quality of reconstructed images compared to standard DeepJSCC and the state-of-the-art generative learning-based method. We will publicly share our source code to facilitate further research and reproducibility.

For many practical applications in wireless communications, we need to recover a structured sparse signal from a linear observation model with dynamic grid parameters in the sensing matrix. Conventional expectation maximization (EM)-based compressed sensing (CS) methods, such as turbo compressed sensing (Turbo-CS) and turbo variational Bayesian inference (Turbo-VBI), have double-loop iterations, where the inner loop (E-step) obtains a Bayesian estimation of sparse signals and the outer loop (M-step) obtains a point estimation of dynamic grid parameters. This leads to a slow convergence rate. Furthermore, each iteration of the E-step involves a complicated matrix inverse in general. To overcome these drawbacks, we first propose a successive linear approximation VBI (SLA-VBI) algorithm that can provide Bayesian estimation of both sparse signals and dynamic grid parameters. Besides, we simplify the matrix inverse operation based on the majorization-minimization (MM) algorithmic framework. In addition, we extend our proposed algorithm from an independent sparse prior to more complicated structured sparse priors, which can exploit structured sparsity in specific applications to further enhance the performance. Finally, we apply our proposed algorithm to solve two practical application problems in wireless communications and verify that the proposed algorithm can achieve faster convergence, lower complexity, and better performance compared to the state-of-the-art EM-based methods.

Model merging combines several independently fine-tuned experts into a single multi-task model without any training data, reducing the storage, serving, and decentralized-development costs of large foundation models. State-of-the-art merging methods formulate merging as a layer-wise quadratic interference minimization problem. Although this problem admits an exact closed-form pseudoinverse solution, that solution underperforms hundreds of iterations of gradient descent in practice. The iterative loop dominates the cost of the pipeline, yet its effectiveness has remained unexplained. We revisit this regime and show that the iterative solver does not primarily act as an optimizer; rather, it serves as an implicit spectral regularizer for an ill-posed normal equation, where small-eigenvalue directions of the per-layer interference operator amplify proxy noise. Building on this finding, we formalize multi-task model merging as a noisy linear inverse problem and propose a spectral filtering estimator parameterized by a per-direction filter. We instantiate this estimator with SWUDI, a closed-form method that combines a soft exponential filter, which matches the gradient-flow trajectory of iterative descent, with a hard top-K truncation that suppresses noise-amplifying small-eigenvalue directions. Furthermore, we propose SWUDI-A, an adaptive variant that replaces the global rank hyperparameter with per-layer rank rules, further improving robustness across architectures. Both variants share a single symmetric eigendecomposition per linear layer and require no training data or optimizer state. Across four general benchmarks and a multimodal merging benchmark spanning VQA, Geometry, Chart, OCR, Grounding, and modality merging, our proposed spectral solvers match or outperform state-of-the-art merging methods. Crucially, they reduce wall-clock time by 28-72x and peak GPU memory by up to 50%.

Multimodal learning has developed very fast in recent years. However, during the multimodal training process, the model tends to rely on only one modality based on which it could learn faster, thus leading to inadequate use of other modalities. Existing methods to balance the training process always have some limitations on the loss functions, optimizers and the number of modalities and only consider modulating the magnitude of the gradients while ignoring the directions of the gradients. To solve these problems, in this paper, we present a novel method to balance multimodal learning with Classifier-Guided Gradient Modulation (CGGM), considering both the magnitude and directions of the gradients. We conduct extensive experiments on four multimodal datasets: UPMC-Food 101, CMU-MOSI, IEMOCAP and BraTS 2021, covering classification, regression and segmentation tasks. The results show that CGGM outperforms all the baselines and other state-of-the-art methods consistently, demonstrating its effectiveness and versatility. Our code is available at https://github.com/zrguo/CGGM.

CNet is a C++/CUDA framework for building deep complex-valued neural networks (CVNNs) and optimizing complex functions by gradient descent with Wirtinger derivatives. Complex models are underexplored yet natural where data is intrinsically complex -- RF/IQ communications, MRI k-space, radar/SAR, audio spectra -- and phase carries information real networks discard. CNet is physics-native: a network is a cascade of complex (often unitary) operations on an amplitude vector, and classification is a Born-rule measurement p_k = |z_k|^2/||z||^2 rather than a softmax over real logits. Its library of complex layers makes conv(x,k) = IFFT(FFT(x).FFT(k)) learnable via signal-processing primitives -- spectral-padding local kernels (Pad), the inverse DFT, a magnitude nonlinearity |z|^2 (CModulus2), holomorphic powers z^M (CPower), and mean pooling (MeanPool) -- with GPU kernels for every layer, a GPU true-Adam optimizer, and a reduced-memory inference mode. Three studies. (1) A fully complex FNet-style causal language model, built on a new O(N log N) causal Fourier mixer, matches a param-matched real-valued causal FNet on tiny-shakespeare in under half the steps. We introduce Born-rule attention: a content-based causal mixer whose weights are quantum-measurement probabilities |<Q_k,K_j>|^2 of one token against another -- the first attention mechanism built on the Born rule. With rotary position embeddings and per-token complex normalization, a fully complex Born-rule model reaches 1.52 nats/char on tiny-shakespeare, matching softmax attention and beating the Fourier mixer by 0.23. (2,3) Two bottleneck analyses -- radio-modulation classification (RML2016.10a) and the Fourier phase problem of coherent-diffraction imaging -- isolate where CVNNs need new operators. The complex machinery learns the correct structure; open problems are concrete and operator-level. Code: https://github.com/crasmarum/CNet

Practitioners accept a compressed language model once it clears a stack of data-cheap quality guards: perplexity within a small factor of the original, downstream accuracy (for example MMLU) inside a confidence interval, and data-free output-fidelity signals that compare the compressed and original network's internal representations under random probe inputs. This stack has a blind spot. Across three model families, gently-compressed models clear every guard and then invent procedure steps that were never in the instructions when they run a standard operating procedure (SOP) as an agent. The effect is operator-specific: coherent low-rank (SVD) truncation induces it, and magnitude pruning matched to the same perplexity does not. One dissociation isolates the cause. The same compressed weights that CI-win a paired output-fidelity test CI-fail the invented-step canary. The governing axis is the coherence of the compression error times its rate; the magnitude of the damage does not predict it. The data-free fidelity probe is a fidelity oracle by construction, so it cannot see this axis. We characterize the blindspot and dissociation with paired confidence intervals on a pre-registered, powered canary across three architectures. Operator-specificity replicates on all three, and the perplexity-guard evasion appears where the model admits in-guard low-rank headroom. We then give a data-free screen: a two-axis statistic of the compression error (coherent-fraction and error-rate) that flags the failing builds with fixed thresholds across architectures and matches the coherence-times-rate mechanism. Perplexity, MMLU, and fidelity acceptance do not certify agent safety. Screen gently-compressed low-rank builds before agentic deployment

Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration [3,4]. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields (which contain both signal and noise photons) to a quantum voltage across the coupled LC harmonic oscillator. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than 95%) is realized based on the proposed scheme for transmission distances reaching 100 m.

Full-duplex spoken language models (FD-SLMs) enable seamless speech interaction by allowing models to listen and speak simultaneously, yet the internal mechanism by which they coordinate listening and speaking remains underexplored. We analyze the predictive behavior encoded in FD-SLM hidden representations and find that they exhibit stream-specific predictive patterns: during listening, they preferentially predict the incoming user stream, whereas during speaking, they preferentially predict the model output stream. Building on this observation, we show that FD-SLMs dynamically modulate their internal predictive focus between two states: a generative state aligned with model output generation and a perceptive state aligned with incoming user input. However, this modulation can lag behind abrupt changes in conversational context. During user interruptions, the model remains transiently biased toward the generative state before transitioning into the perceptive state, causing it to miss the beginning of the incoming input. We term this delayed internal transition state inertia. To quantify its downstream impact, we introduce the Zero-Buffer Benchmark (ZBB), a diagnostic benchmark for evaluating immediate interruption comprehension when user speech begins abruptly. We evaluate this setting using response correctness and initial-word occurrence rate (IWOR). Finally, we mitigate state inertia through activation steering with a perception vector, a training-free intervention with little additional computational overhead. Across multiple state-of-the-art FD-SLMs, activation steering substantially improves interruption handling; for example, on PersonaPlex, it improves correctness from 28% to 45% and IWOR from 40% to 72% without any fine-tuning.

Recently, various methods have been proposed to address the inconsistency issue of DDIM inversion to enable image editing, such as EDICT [36] and Null-text inversion [22]. However, the above methods introduce considerable computational overhead. In this paper, we propose a new technique, named bi-directional integration approximation (BDIA), to perform exact diffusion inversion with neglible computational overhead. Suppose we would like to estimate the next diffusion state z_{i-1} at timestep t_i with the historical information (i,z_i) and (i+1,z_{i+1}). We first obtain the estimated Gaussian noise boldsymbol{epsilon}(z_i,i), and then apply the DDIM update procedure twice for approximating the ODE integration over the next time-slot [t_i, t_{i-1}] in the forward manner and the previous time-slot [t_i, t_{t+1}] in the backward manner. The DDIM step for the previous time-slot is used to refine the integration approximation made earlier when computing z_i. A nice property of BDIA-DDIM is that the update expression for z_{i-1} is a linear combination of (z_{i+1}, z_i, boldsymbol{epsilon}(z_i,i)). This allows for exact backward computation of z_{i+1} given (z_i, z_{i-1}), thus leading to exact diffusion inversion. It is demonstrated with experiments that (round-trip) BDIA-DDIM is particularly effective for image editing. Our experiments further show that BDIA-DDIM produces markedly better image sampling qualities than DDIM for text-to-image generation. BDIA can also be applied to improve the performance of other ODE solvers in addition to DDIM. In our work, it is found that applying BDIA to the EDM sampling procedure produces consistently better performance over four pre-trained models.

Before invoking external tools, an agentic LLM must select among a K-way action space: executing a call, seeking clarification, answering directly, or declining. While internal activation steering can alter these pre-execution decisions, conventional aggregate metrics obscure where altered states land and what collateral damage they inflict. We present SAKIKO, an auditing framework that formalizes representation repair via directional error discovery, router-conditioned intervention, destination-resolved verification, and prospectively frozen statistical licensing. Across seven LLMs on When2Call and MetaTool, channel-keyed interventions induce direction-specific net gains in five models; across three sealed evaluations, none of 59 budget-matched random directions matches calibrated target gain. Crucially, destination auditing shows that behavioral movement does not equal repair: an intervention achieving +55 net gain corrupts over half of the baseline-correct decisions it touches, and promising point estimates on Qwen3-4B and Gemma-2-9B are formally declined due to finite-sample uncertainty. SAKIKO establishes the necessity of outcome-resolved adjudication before claiming internal repair. Code: https://github.com/ruizheliUOA/mechanistic-tool-use-llm.

Diffusion models are proficient at generating high-quality images. They are however effective only when operating at the resolution used during training. Inference at a scaled resolution leads to repetitive patterns and structural distortions. Retraining at higher resolutions quickly becomes prohibitive. Thus, methods enabling pre-existing diffusion models to operate at flexible test-time resolutions are highly desirable. Previous works suffer from frequent artifacts and often introduce large latency overheads. We propose two simple modules that combine to solve these issues. We introduce a Frequency Modulation (FM) module that leverages the Fourier domain to improve the global structure consistency, and an Attention Modulation (AM) module which improves the consistency of local texture patterns, a problem largely ignored in prior works. Our method, coined Fam diffusion, can seamlessly integrate into any latent diffusion model and requires no additional training. Extensive qualitative results highlight the effectiveness of our method in addressing structural and local artifacts, while quantitative results show state-of-the-art performance. Also, our method avoids redundant inference tricks for improved consistency such as patch-based or progressive generation, leading to negligible latency overheads.

Training loss and throughput can hide distinct internal representation in language-model training. To examine these hidden mechanics, we use spectral measurements as practical and operational diagnostics. Using a controlled family of decoder-only models adapted from the modded NanoGPT codebase, we introduce an empirical protocol based on activation covariance and per-sample gradient SVD spectra. This dual-view reveals three empirical findings and one mechanistic explanation. First, batch size acts as a latent determinant of representation geometry: runs that reach equal loss settle into systematically distinct activation spectra. Second, the activation covariance tail measured early in training reliably forecasts downstream token efficiency. Third, movement of the activation spectrum head (leading modes), together with gradient spectra, characterizes underlying learning-dynamics changes, separating learning-side architectural improvements from primarily execution-side gains. These predictive and diagnostic signals persist across the 12-, 36-, and 48-layer model tiers. Finally, a mechanistic model proves the main observations and explains how activation covariance spectra correlate with task-aligned feature learning.

Environment-aware 6G wireless networks demand the deep integration of multimodal and wireless data. However, most existing datasets are confined to 2D terrestrial far-field scenarios, lacking the 3D spatial context and near-field characteristics crucial for low-altitude extremely large-scale multiple-input multiple-output (XL-MIMO) systems. To bridge this gap, this letter introduces Multimodal-NF, a large-scale dataset and specialized generation framework. Operating in the upper midband, it synchronizes high-fidelity near-field channel state information (CSI) and precise wireless labels (e.g., Top-5 beam indices, LoS/NLoS) with comprehensive sensory modalities (RGB images, LiDAR point clouds, and GPS). Crucially, these multimodal priors provide spatial semantics that help reduce the near-field search space and thereby lower the overhead of wireless sensing and communication tasks. Finally, we validate the dataset through representative case studies, demonstrating its utility and effectiveness. The open-source generator and dataset are available at https://lmyxxn.github.io/6GXLMIMODatasets/.

We audit frequency and decoder-depth claims for AdvWave-P, an additive audio jailbreak, on Qwen2-Audio. The protocol masks frequency components of the perturbation in the short-time Fourier transform (STFT) domain and measures attack success and audio-span representations. On 520 AdvBench prompts, the primary judge labels 76.7% of adversarial inputs as jailbreaks. A condition-blind, single-annotator validation yields a Rogan-Gladen sensitivity estimate of 0.87 for this condition (about 0.83-0.95 with validation-rate uncertainty); this correction is not applied to masked conditions. The apparent frequency ranking depends on the partition: energy share alone predicts the standard eight-band ranking (Spearman's rho = 0.95), and equal-Hz and equal-energy partitions show that masking any tested band can sharply reduce attack success. At a finer 16-band equal-energy resolution, however, masking the narrow 7520-7960 Hz band leaves ASR at 0.10, which remains unresolved without a matched control. Matched-energy scattered-removal tests show that contiguous removal is more damaging in lower bands, while both forms approach the floor in upper bands. Global rescaling leaves ASR near baseline but tests amplitude sensitivity rather than frequency location. In a re-optimization pilot (n = 20), tested single- and two-band supports reach ASRs of 0.00, 0.25, and 0.40, while random supports covering about half the STFT bins reach a mean of 0.86. In a prompt- and energy-adjusted model, audio-span divergence is associated with band necessity, with the coefficient rising from +0.63 at the projector output to +0.93 at layer 30 (contrast +0.293, 95% CI [0.11, 0.51]). This association is not a causal localization, and single-layer patching does not establish a causal layer. The results support partition-aware auditing of frequency claims, leaving the fine-resolution top-band result and broader generality open.

Recently, an audio-visual segmentation (AVS) task has been introduced, aiming to group pixels with sounding objects within a given video. This task necessitates a first-ever audio-driven pixel-level understanding of the scene, posing significant challenges. In this paper, we propose an innovative audio-visual transformer framework, termed COMBO, an acronym for COoperation of Multi-order Bilateral relatiOns. For the first time, our framework explores three types of bilateral entanglements within AVS: pixel entanglement, modality entanglement, and temporal entanglement. Regarding pixel entanglement, we employ a Siam-Encoder Module (SEM) that leverages prior knowledge to generate more precise visual features from the foundational model. For modality entanglement, we design a Bilateral-Fusion Module (BFM), enabling COMBO to align corresponding visual and auditory signals bi-directionally. As for temporal entanglement, we introduce an innovative adaptive inter-frame consistency loss according to the inherent rules of temporal. Comprehensive experiments and ablation studies on AVSBench-object (84.7 mIoU on S4, 59.2 mIou on MS3) and AVSBench-semantic (42.1 mIoU on AVSS) datasets demonstrate that COMBO surpasses previous state-of-the-art methods. Code and more results will be publicly available at https://combo-avs.github.io/.

As 5G technology becomes increasingly established, the anticipation for 6G is growing, which promises to deliver faster and more reliable wireless connections via cutting-edge radio technologies. However, efficient management method of the large-scale antenna arrays deployed by those radio technologies is crucial. Traditional management methods are mainly reactive, usually based on feedback from users to adapt to the dynamic wireless channel. However, a more promising approach lies in the prediction of spatial channel state information (spatial-CSI), which is an all-inclusive channel characterization and consists of all the feasible line-of-sight (LoS) and non-line-of-sight (NLoS) paths between the transmitter (Tx) and receiver (Rx), with the three-dimension (3D) trajectory, attenuation, phase shift, delay, and polarization of each path. Advances in hardware and neural networks make it possible to predict such spatial-CSI using precise environmental information, and further look into the possibility of holographic communication, which implies complete control over every aspect of the radio waves emitted. Based on the integration of holographic communication and digital twin, we proposed a new framework, digital radio twin, which takes advantages from both the digital world and deterministic control over radio waves, supporting a wide range of high-level applications. As a preliminary attempt towards this visionary direction, in this paper, we explore the use of generative artificial intelligence (AI) to pinpoint the valid paths in a given environment, demonstrating promising results, and highlighting the potential of this approach in driving forward the evolution of 6G wireless communication technologies.

Accurate Multivariate Time Series (MTS) forecasting is crucial for collaborative design of complex systems, Digital Twin building, and maintenance ahead of time. However, the collaborative industrial environment presents new challenges for MTS forecasting models: models should decouple complex inter-variable dependencies while addressing non-stationary distribution shift brought by environmental changes. To address these challenges and improve collaborative sensing reliability, we propose a Patch-Based Dual-Branch Channel-Temporal Forecasting Network (D-CTNet). Particularly, with a parallel dual-branch design incorporating linear temporal modeling layer and channel attention mechanism, our method explicitly decouples and jointly learns intra-channel temporal evolution patterns and dynamic multivariate correlations. Furthermore, a global patch attention fusion module goes beyond the local window scope to model long range dependencies. Most importantly, aiming at non-stationarity, a Frequency-Domain Stationarity Correction mechanism adaptively suppresses distribution shift impacts from environment change by spectrum alignment. Evaluations on seven benchmark datasets show that our model achieves better forecasting accuracy and robustness compared with state-of-the-art methods. Our work shows great promise as a new forecasting engine for industrial collaborative systems.

Massive Activations (MAs) have been widely observed in Transformer-based models, yet their structure and functional roles in Diffusion Transformers (DiTs) remain insufficiently understood. In this work, we systematically analyze MAs in representative DiTs and find that they are spatially distributed across image tokens while concentrated in a small set of fixed feature dimensions. We further show that these dimensions are closely aligned with AdaLN residual scaling factors and are primarily modulated by the denoising timestep rather than text conditions. This structure leads to two task-dependent effects: for generation, MAs are critical for fine-grained detail synthesis while having limited influence on global semantics; for understanding, their shared high-magnitude directions make raw DiT features overly similar across spatial tokens and weaken dense feature discrimination. Based on these findings, we introduce Eliciting Massive Activation (EMA), a training-free framework that leverages Massive Activations (MAs) as a unified modulation signal to improve both generative and representational capabilities of DiTs. For generation, EMA proposes MA-driven Detail G}uidance (DG), which suppresses MA dimensions to construct a detail-deficient counterfactual prediction and guides sampling toward finer visual details. DG further supports efficient partial-forward inference, integration with classifier-free guidance, and token-level Local DG for refining selected image regions. For understanding, EMA introduces MA-modulated REPresentation extraction (MREP), which uses pretrained AdaLN channel-wise modulation to reduce MA directional dominance and concatenates spatially normalized MA maps to preserve useful spatial structure. Extensive experiments demonstrate that EMA consistently improves both the generation quality and representation capability of DiTs.